๐”– Bobbio Scriptorium
โœฆ   LIBER   โœฆ

Vibration of skew plates

โœ Scribed by P.S. Nair; S. Durvasula


Publisher
Elsevier Science
Year
1973
Tongue
English
Weight
926 KB
Volume
26
Category
Article
ISSN
0022-460X

No coin nor oath required. For personal study only.

โœฆ Synopsis


The vibration problems of skew plates with different edge conditions involving simple support and clamping have been considered by using the variational method of Ritz, a double series of beam characteristic functions being employed appropriate to the combination of the edge conditions. Natural frequencies and modes of vibration have been obtained for different combinations of side ratio and skew angle. These detailed studies reveal several interesting features concerning the frequency curves and nodal patterns. The results presented should, in addition, be of considerable value and practical significance in design applications.


๐Ÿ“œ SIMILAR VOLUMES


Vibration of continuous skew plates
โœ T. Mizusawa; T. Kajita ๐Ÿ“‚ Article ๐Ÿ“… 1984 ๐Ÿ› John Wiley and Sons ๐ŸŒ English โš– 242 KB
FREE VIBRATION OF SYMMETRICALLY LAMINATE
โœ W. Han; S.M. Dickinson ๐Ÿ“‚ Article ๐Ÿ“… 1997 ๐Ÿ› Elsevier Science ๐ŸŒ English โš– 515 KB

A Ritz approach, developed for the analysis of the vibration of thin, laminated, rectangular plates, is extended to apply to symmetrically laminated, composite, skew plates. There is relatively little information available on the vibration of such skew plates, despite their increasing use in the aer

TRANSVERSE VIBRATION OF SKEW PLATES WITH
โœ B. Singh; V. Saxena ๐Ÿ“‚ Article ๐Ÿ“… 1997 ๐Ÿ› Elsevier Science ๐ŸŒ English โš– 300 KB

The Rayleigh-Ritz method has been used to study the transverse vibrations of skew plates of variable thickness with different combinations of boundary conditions at the four edges. The two-dimensional thickness variation is taken as the Cartesian product of linear variations along the two concurrent