Vibration characteristics of steel–concrete composite floor systems

✍ Scribed by Stephen Hicks

• Publisher: John Wiley and Sons
• Year: 2004
• Tongue: English
• Weight: 304 KB
• Volume: 6
• Category: Article
• ISSN: 1365-0556
• DOI: 10.1002/pse.163

✦ Synopsis

Abstract

Trends towards long‐span, lightweight floors in steel–concrete composite construction are resulting in structures possessing low natural frequencies, and potentially susceptible to vibration problems. The most common source of vibrations is caused by human activities on the floor, however, in some instances, mechanically induced vibrations from air conditioning plant, etc. may also be problematic. In this paper the serviceability assessment of floor vibration occasioned by walking activities is considered.

Over 30 years ago concerns were raised regarding vibrations induced by walking on steel–concrete composite floors that satisfied traditional deflection criteria. In response to these concerns, design criteria based on a simple impulsive loading function from a person rising onto the balls of the feet, and suddenly dropping onto the heels has been used as a measure of floor acceptability. More recently, design procedures have been developed that more realistically consider the excitation of the floor from walking activities.

In the first part of this paper a historical review of acceptability criteria for floor vibrations will be made. Following this, the current design methodologies for steel–concrete composite floors will be reviewed prior to the presentation of results from a series of in situ vibration tests on a wide variety of floor types. After comparing the test results with current guidance, design recommendations and suggestions for future research will be given.