✦ LIBER ✦

Vibration analysis of a high-speed spindle under the action of a moving mass

✍ Scribed by U.C. Gu; C.C. Cheng

Publisher: Elsevier Science
Year: 2004
Tongue: English
Weight: 304 KB
Volume: 278
Category: Article
ISSN: 0022-460X
DOI: 10.1016/j.jsv.2003.10.034

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Vibration analyses of a portal frame und

Vibration analyses of a portal frame under the action of a moving distributed mass using moving mass element

✍ Jia-Jang Wu 📂 Article 📅 2005 🏛 John Wiley and Sons 🌐 English ⚖ 985 KB

VIBRATION ANALYSIS OF THE CONTINUOUS BEA

VIBRATION ANALYSIS OF THE CONTINUOUS BEAM SUBJECTED TO A MOVING MASS

✍ M. ICHIKAWA; Y. MIYAKAWA; A. MATSUDA 📂 Article 📅 2000 🏛 Elsevier Science 🌐 English ⚖ 198 KB

GROUND VIBRATION IN THE VICINITY OF A HI

GROUND VIBRATION IN THE VICINITY OF A HIGH-SPEED MOVING HARMONIC STRIP LOAD

✍ G. LEFEUVE-MESGOUEZ; D. LE HOUÉDEC; A.T. PEPLOW 📂 Article 📅 2000 🏛 Elsevier Science 🌐 English ⚖ 246 KB

The transmission of vibrations over the surface of the ground, due to a high-speed moving, vertical harmonic strip load, is investigated theoretically. Consequently, the problem is essentially two-dimensional and the interior of the ground is modelled as an elastic half-space. The transformed soluti

Vibrations of a taut string and torsiona

Vibrations of a taut string and torsional vibration of a gun barrel under the influence of a moving mass

✍ B.R. Holmberg 📂 Article 📅 1983 🏛 Elsevier Science 🌐 English ⚖ 567 KB

Vibration of damaged beams under a movin

Vibration of damaged beams under a moving mass: theory and experimental validation

✍ C. Bilello; L.A. Bergman 📂 Article 📅 2004 🏛 Elsevier Science 🌐 English ⚖ 313 KB

TRANSIENT VIBRATION ANALYSIS OF A HIGH-S

TRANSIENT VIBRATION ANALYSIS OF A HIGH-SPEED FEED DRIVE SYSTEM

✍ C.C. CHENG; J.S. SHIU 📂 Article 📅 2001 🏛 Elsevier Science 🌐 English ⚖ 207 KB

The transient vibration of a high-speed feed drive system is investigated. In this study, an analogue vibratory equivalent model with multi-degree of freedom assembled with spring, mass and damper is used to simulate the dynamic behavior of a feed drive system. The worktable is capable of travelling