✦ LIBER ✦

Velocity Distributions and Mixing in the Translational Region of a Kneading Section in a Co-rotating Twin-screw Extruder

✍ Scribed by L. Yerramilli; M.V. Karwe

Book ID: 115031341
Publisher: Institution of Chemical Engineers
Year: 2004
Tongue: English
Weight: 953 KB
Volume: 82
Category: Article
ISSN: 0960-3085
DOI: 10.1205/096030804322985263

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Measuring of Velocity Distributions in t

Measuring of Velocity Distributions in the Nip Region of a Co-Rotating Twin-Screw Extruder

✍ S. Bakalis; M.V. Karwe 📂 Article 📅 1999 🏛 Institution of Chemical Engineers 🌐 English ⚖ 814 KB

Experimental analysis of the kneading di

Experimental analysis of the kneading disk region in a co-rotating twin screw extruder: Part 1. Flow characteristics of the kneading disk region

✍ Y. Shimizu; S. Arai; T. Itoyama; H. Kawamoto 📂 Article 📅 1996 🏛 John Wiley and Sons 🌐 English ⚖ 501 KB

Co-rotating twin screw extruders are extensively used in polymer compounding. In co-rotating twin screw extruders, the kneading disk region is the most influential for compounding efficiency. However, only a few studies have so far been made for the flow analysis of the kneading disk region. This ma

Velocity measurements in the nip region

Velocity measurements in the nip region of a co-rotating twin-screw extruder using laser Doppler anemometry

✍ M. V. Karwe; S. Bakalis; V. Sernas 📂 Article 📅 1997 🏛 John Wiley and Sons 🌐 English ⚖ 245 KB 👁 2 views

The laser Doppler anemometer (LDA) technique has been successfully applied to measure the local velocities in the nip region of a twinscrew extruder. Tangential and axial components of velocity for heavy corn syrup were measured below and on either side of the nip. The experimental data show that th

The Mixing Efficiency of an Eccentric-Di

The Mixing Efficiency of an Eccentric-Disc Kneading Zone in Intermeshing Co- and Counter-Rotating Twin-Screw Extruders

✍ H. Brod; U. Liesenfelder 📂 Article 📅 2004 🏛 John Wiley and Sons 🌐 English ⚖ 178 KB 👁 2 views

## Abstract The distributive mixing efficiency of a twin‐screw extruder kneading zone consisting of eccentric disc elements was measured using an online video technique. Both co‐ and counter‐rotation were examined. Viscous Newtonian silicone oil was used as model liquid and black iron oxide pigment

Experimental analysis of the kneading di

Experimental analysis of the kneading disk region in a co-rotating twin screw extruder: Part 2. glass-fiber degradation during compounding

✍ Y. Shimizu; S. Arai; T. Itoyama; H. Kawamoto 📂 Article 📅 1997 🏛 John Wiley and Sons 🌐 English ⚖ 269 KB 👁 2 views

The fiber degradation in the kneading disk region of a corotating twin screw extruder was studied with a closed single-stage co-rotating twin screw extruder as a model for the analysis. In a previous article, we reported that the stress in the kneading zone was proportional to the screw torque. In t

The development of laminar morphology in

The development of laminar morphology in a co-rotating twin screw extruder

✍ O. Rodriguez-Veloz; M. R. Kamal 📂 Article 📅 1999 🏛 John Wiley and Sons 🌐 English ⚖ 727 KB

Laminar morphology of high-density polyethylene (HDPE)/ polyamide-6 (PA-6) blends was obtained, for the first time, in a co-rotating twin screw extruder. The morphology analysis in the interior of the adapter, which connects the extruder with a slit die, revealed that, under specific processing cond