𝔖 Bobbio Scriptorium
✦   LIBER   ✦

UV curing of composites based on modified unsaturated polyester

✍ Scribed by Wenfang Shi; Bengt Rånby

Publisher
John Wiley and Sons
Year
1994
Tongue
English
Weight
700 KB
Volume
51
Category
Article
ISSN
0021-8995

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Microgel formation and thermo-mechanical
Microgel formation and thermo-mechanical properties of UV-curing unsaturated polyester acrylates
✍ Ahmet Nebioglu; Mark D. Soucek 📂 Article 📅 2007 🏛 John Wiley and Sons 🌐 English ⚖ 409 KB 👁 2 views

## Abstract The effect of internal and terminal unsaturation on the properties of the acrylated polyester films was investigated. Four types of acrylated polyester resin were prepared using adipic acid, maleic anhydride, neopentyl glycol, trimethylolpropane, and acrylic acid. Terminal and internal

Composite cure kinetic analysis of unsat
Composite cure kinetic analysis of unsaturated polyester free radical polymerization
✍ Young-Min Yun; Seung-Jong Lee; Ki-Jun Lee; Young-Kwan Lee; Jae-Do Nam 📂 Article 📅 1997 🏛 John Wiley and Sons 🌐 English ⚖ 196 KB 👁 2 views

Curing kinetics of unsaturated polyester resin system exhibiting apparent induction periods was investigated by modeling free radical initiation and propagation processes. The isothermal curing induction time as well as the maximum-rate time provided the same activation energy in the Arrhenius relat

Preparation and testing of local polyest
Preparation and testing of local polyester composites based on unsaturated polyesters as binder
✍ Michael H. Nosseir; N. L. Doss; S. Y. Toufik 📂 Article 📅 1986 🏛 John Wiley and Sons 🌐 English ⚖ 251 KB 👁 2 views

## Synopsis A series of polymeric composites were prepared with sand/polyester ratio 928%. The sand used was local one. The polymeric composites were tested for their compressive strength, exterior volume, porosity, water uptake, specific gravity, volume of open pores and bulk density. The mechani