UV-cured fluorinated coatings for plastics: effect of the photoinitiator and of the substrate filler on adhesion

✍ Scribed by A Di Gianni; R Bongiovanni; A Priola; S Turri

• Publisher: Elsevier Science
• Year: 2004
• Tongue: English
• Weight: 333 KB
• Volume: 24
• Category: Article
• ISSN: 0143-7496
• DOI: 10.1016/j.ijadhadh.2004.01.006

✦ Synopsis

A high-performance fluorinated acrylic coating, containing perfluoropolyether chains, was applied to polyethylene and polypropylene by means of the UV-curing technique. The conditions for a good adhesion onto the plastic substrates were studied. A chemical bonding between the cured network and both the substrates was achieved when the photopolymerization was performed in the presence of benzophenone as a photoinitiator: by hydrogen abstraction from the substrate, polymer radicals were formed and could then initiate the polymerization of the acrylic species; grafting experiments of hydroxyethylacrylate confirmed this mechanism. However, the grafting reaction did not take place when the plastic substrates contained carbon black as a filler, which acted as a radical scavenger. In this case, in fact the adhesion results are not good, similar to those obtained in presence of a cleavage-type photoinitiator.