✦ LIBER ✦

Using the envelope of the frequency response in the measurement of power absorbed by a finite structure

✍ Scribed by R.J. Pinnington

Publisher: Elsevier Science
Year: 1986
Tongue: English
Weight: 580 KB
Volume: 109
Category: Article
ISSN: 0022-460X
DOI: 10.1016/s0022-460x(86)80027-x

No coin nor oath required. For personal study only.

✦ Synopsis

The power absorbed by a finite structure is equated to the sum of the powers absorbed by each mode of vibration. The power in each mode may be measured from the acceleration cross spectral density between any two points and an envelope function which passes through the peaks in the transfer functions between these points. The validity of the method is examined and the method is used to measure the power absorbed by a plate.

📜 SIMILAR VOLUMES

The dynamics of a packed gas absorber by

The dynamics of a packed gas absorber by frequency response analysis

✍ Robert I. Gray; John W. Prados 📂 Article 📅 1963 🏛 American Institute of Chemical Engineers 🌐 English ⚖ 746 KB

The measurement of oxygen-transfer coeff

The measurement of oxygen-transfer coefficients in fermentors by frequency response techniques

✍ F. Vardar; M. D. Lilly 📂 Article 📅 1982 🏛 John Wiley and Sons 🌐 English ⚖ 309 KB 👁 2 views

Estimation of the frequency response of

Estimation of the frequency response of a structure using its non-stationary vibration

✍ Yoshimutsu Hirata 📂 Article 📅 2008 🏛 Elsevier Science 🌐 English ⚖ 124 KB

On the heat effect in measurements of so

On the heat effect in measurements of sorption kinetics by the frequency response method

✍ L.M. Sun; F. Meunier; J. Kärger 📂 Article 📅 1993 🏛 Elsevier Science 🌐 English ⚖ 784 KB

The effect of heat transfer on the frequency response of sorption kinetics is theoretically investigated using a detailed model incorporating a single diffusion resistance, a surface barrier and heat transfer resistance at the adsorbent surface and at the chamber wall. The steady-state periodic solu

ERRORS IN THE MEASUREMENT OF STRUCTURE-B

ERRORS IN THE MEASUREMENT OF STRUCTURE-BORNE POWER FLOW USING TWO-ACCELEROMETER TECHNIQUES

✍ R.S. Ming; R.J.M. Craik 📂 Article 📅 1997 🏛 Elsevier Science 🌐 English ⚖ 213 KB

This paper presents a theoretical study of three errors in the measurement of structure-borne power flow in one-dimensional structures using two-accelerometer techniques. It is assumed that the physical and material properties of the test structure are known. For the measurement of bending wave powe

Leak location using the pattern of the f

Leak location using the pattern of the frequency response diagram in pipelines: a numerical study

✍ Pedro J. Lee; John P. Vítkovský; Martin F. Lambert; Angus R. Simpson; James A. L 📂 Article 📅 2005 🏛 Elsevier Science 🌐 English ⚖ 611 KB

This paper presents a method of leak detection in a single pipe where the behaviour of the system frequency response diagram (FRD) is used as an indicator of the pipe integrity. The presence of a leak in a pipe imposes a pattern on the resonance peaks of the FRD that can be used as a clear indicatio