๐”– Bobbio Scriptorium
โœฆ   LIBER   โœฆ

Using the electrical potential difference method in static cracking resistance tests

โœ Scribed by V. Yu. Gol'tsev; Yu. V. Ivashchenko

Book ID
104909708
Publisher
Springer
Year
1993
Tongue
English
Weight
151 KB
Volume
28
Category
Article
ISSN
1573-885X

No coin nor oath required. For personal study only.

๐Ÿ“œ SIMILAR VOLUMES

On the electrical potential analysis of
On the electrical potential analysis of a cracked fracture mechanics test specimen using the finite element method
โœ W.K. Wilson ๐Ÿ“‚ Article ๐Ÿ“… 1983 ๐Ÿ› Elsevier Science ๐ŸŒ English โš– 943 KB

The use of the finite element method to calculate electrical potential drop vs crack extension calibration curves for fracture mechanics test specimens is investigated. The influence of finite element mesh size and the use of singular elements at the crack tip are considered. Also, some of the detai

The detection of slow crack growth in cr
The detection of slow crack growth in crack opening displacement specimens using an electrical potential method
โœ J.M. Lowes; G.D. Featnehough ๐Ÿ“‚ Article ๐Ÿ“… 1971 ๐Ÿ› Elsevier Science ๐ŸŒ English โš– 482 KB

The potential drop method as used in fatigue and fracture toughness testing has been applied to tests on COD specimens. These tests showed that providing electrical stability is maintained, the method can be used to detect the onset of ductile crack growth. Initial plastic deformation (in absence of

On the calibration of the electrical pot
On the calibration of the electrical potential technique for monitoring crack growth using finite element methods
โœ R. O. Ritchie; K. J. Bathe ๐Ÿ“‚ Article ๐Ÿ“… 1979 ๐Ÿ› Springer Netherlands ๐ŸŒ English โš– 443 KB

Finite element analysis procedures are utilized to provide theoretical calibration curves for the electrical potential crack-monitoring system as applied to single-edge-notch (SEN) and compact tension (CT) fracture specimens. The results are compared to existing calibrations for such test piece geom