We report on the introduction of active optical elements into confocal and multiphoton microscopes in order to reduce the sample-induced aberration. Using a flexible membrane mirror as the active element, the beam entering the rear of the microscope objective is altered to produce the smallest point
Use of confocal and multiphoton microscopy for the evaluation of micro-optical components and emitters
✍ Scribed by J.M. Girkin; E. Gu; C. Griffin; H.W. Choi; M.D. Dawson; G. McConnell
- Publisher
- John Wiley and Sons
- Year
- 2004
- Tongue
- English
- Weight
- 179 KB
- Volume
- 64
- Category
- Article
- ISSN
- 1059-910X
No coin nor oath required. For personal study only.
✦ Synopsis
Abstract
We report on the application of confocal and multiphoton microscopic techniques for the evaluation of the latest generation of micro optical components. The optical emitting characteristics of arrays of matrix addressable GaN micrometer‐sized light emitting diodes (micro‐LEDs) have been measured using a commercial confocal microscope utilising the LEDs' own emission along with reflection confocal microscopy to determine the surface structure. Multiphoton induced luminescence from the 10–20‐micron diameter emitters has also been used to examine the structure of the device and we compare this with electrically induced emission. In related work, the optical properties of micro lens arrays (10–100‐micron diameter) fabricated in SiC, Sapphire, and Diamond have been determined using transmission confocal microscopy. Such optical microscopy techniques offer a simple, non‐destructive method to determine the structure and performance of such novel devices. Microsc. Res. Tech. 64:293–296, 2004. © 2004 Wiley‐Liss, Inc.
📜 SIMILAR VOLUMES
This review article looks at the development of confocal imaging technology, with emphasis on its abilities to overcome some of the problems of imaging life processes, particularly in the intact organ or animal. A brief summary of three promising micro-imaging modalities is provided (which are micro
## Abstract Ultrafast lasers have found increasing use in scanning optical microscopy due to their very high peak power in generating multiphoton excitations. A mode‐locked Ti:sapphire laser is often employed for such purposes. Together with a synchronously pumped optical parametric oscillator (OPO