✦ LIBER ✦

Use of casting tape for support of an extraoral impression

✍ Scribed by Hakimeh Siadat; Ali Mirfazaelian

Book ID: 114054938
Publisher: Elsevier Science
Year: 2003
Tongue: English
Weight: 193 KB
Volume: 90
Category: Article
ISSN: 1097-6841
DOI: 10.1016/s0022-3913(03)00531-6

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Use of vinyl polysiloxane impression mat

Use of vinyl polysiloxane impression material as an extraoral obturator for orocutaneous fistulas

✍ Sidney L. Bourgeois Jr; Carlos M. Alvarez 📂 Article 📅 2002 🏛 Elsevier Science 🌐 English ⚖ 140 KB

Use of polyvinyl siloxane material for a

Use of polyvinyl siloxane material for an altered cast impression tray

✍ Hsu, Yung-tsung 📂 Article 📅 2014 🏛 Elsevier Science 🌐 English ⚖ 591 KB

An instrument for tracing surface contou

An instrument for tracing surface contours of impressions, casts and dentures

✍ S. K. Lechner; E. M. Bevan 📂 Article 📅 1971 🏛 Australian Dental Association 🌐 English ⚖ 519 KB

Fabrication characteristics of an anode-

Fabrication characteristics of an anode-supported thin-film electrolyte fabricated by the tape casting method for IT-SOFC

✍ Jung-Hoon Song; Sun-Il Park; Jong-Ho Lee; Ho-Sung Kim 📂 Article 📅 2008 🏛 Elsevier Science 🌐 English ⚖ 943 KB

An anode-supported yttria-stabilized zirconia (YSZ) electrolyte was fabricated using tape casting and co-sintering techniques for use in a solid oxide fuel cell (SOFC). Nickel/YSZ, lanthanum strontium manganite (La 0.85 Sr 0.15 MnO 3 ) and 8 mol% Y 2 O 3 -ZrO 2 were used for the anode, the cathode a

Processing of an aqueous tape casting of

Processing of an aqueous tape casting of mesocarbon microbeads for high-performance carbonaceous laminations

✍ X.B. Hu; S. Zhong; B.Y. Zhao; K.A. Hu 📂 Article 📅 2003 🏛 Elsevier Science 🌐 English ⚖ 471 KB

Tape casting is a traditional method for the manufacture of ceramic laminations. In this study, aqueous tape casting was adopted to obtain high-performance carbonaceous laminations with homogeneous density and high strength. For the preparation of a stable and homogeneous slurry of mesocarbon microb

Influence of pore formers on slurry comp

Influence of pore formers on slurry composition and microstructure of tape cast supporting anodes for SOFCs

✍ A. Sanson; P. Pinasco; E. Roncari 📂 Article 📅 2008 🏛 Elsevier Science 🌐 English ⚖ 906 KB

Nickel-yttria stabilized zirconia cermet (Ni/YSZ) is the most common material for supporting anodes in fuel cells applications. The microstructure of this element is crucial for the performances of the entire fuel cell. For this reason, four different pore formers (graphite, carbon black, rice starc