𝔖 Bobbio Scriptorium

✦ LIBER ✦

Use of atomic force microscopy to quantify slip irreversibility in a nickel-base superalloy

✍ Scribed by M. Risbet; X. Feaugas; C. Guillemer-Neel; M. Clavel

Book ID: 114387505
Publisher: Elsevier Science
Year: 2003
Tongue: English
Weight: 213 KB
Volume: 49
Category: Article
ISSN: 1359-6462
DOI: 10.1016/s1359-6462(03)00357-9

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Atomic force microscopy imaging to measu

Atomic force microscopy imaging to measure precipitate volume fraction in nickel-based superalloys

✍ A. Bourhettar; A. Hazotte; M. Troyon 📂 Article 📅 1995 🏛 Elsevier Science 🌐 English ⚖ 653 KB

Stereological characterization of the γ'

Stereological characterization of the γ' particles in a nickel base superalloy: Comparison between transmission electron microscopy and atomic force microscopy techniques

✍ M. Risbet; X. Feaugas; C. Guillemer-Neel; M. Clavel 📂 Article 📅 2008 🏛 Elsevier Science 🌐 English ⚖ 614 KB

Damage in nickel base superalloy: Influe

Damage in nickel base superalloy: Influence of local parameters measured by electron backscattered diffraction and atomic force microscopy

✍ M. Risbet; X. Feaugas; C. Guillemer-Neel; M. Clavel 📂 Article 📅 2009 🏛 Elsevier Science 🌐 English ⚖ 175 KB

Activation of dislocation sources in γ-p

Activation of dislocation sources in γ-phases of nickel-base superalloys studied by use of atomic-force microscopy and transmission electron microscopy

✍ F. Pettinari-Sturmel; C. Coupeau; N. Clément; A. Coujou 📂 Article 📅 2004 🏛 Elsevier Science 🌐 English ⚖ 297 KB

Utilizing scanning electron microscopy t

Utilizing scanning electron microscopy to observe the initiation and development of slip bands and fracture in a nickel based metallic glass : S. J. Harbert and A. Wolfenden. Micron microsc. acta 19, 105 (1988)

📂 Article 📅 1989 🏛 Elsevier Science 🌐 English ⚖ 128 KB

Oxygen interaction of CdS-based gas sens

Oxygen interaction of CdS-based gas sensors with different stoichiometric compositions was studied by X-ray photoelectron spectroscopy (XPS) and thermal-desorption mass spectroscopy observations combined with conductivity measurements. Three different types of film with different atomic ratios of Cd/S were used in the study of oxygen chemisorption in a low-temperature range between 300 and 570 K. Spray pyrolysis was used for the deposition of the films on glass substrates; XPS and energy dispersive spectroscopy of X-ray together with atomic force microscopy and scanning electron microscopy were used for the characterization of the composition and structure of the films. It was possible to distinguish different temperature ranges for the thermal desorption of the different adsorbed oxygen species. A comparison of the data from XPS and mass-spectroscopy observations with conductance measurements allows to conclude that metallic surface atoms are responsible for different interactions of oxygen species with CdS surfaces.

📂 Article 📅 1995 🏛 Elsevier Science 🌐 English ⚖ 379 KB