✦ LIBER ✦

Upper-bound and finite-element analysis of axisymmetric hot extrusion

✍ Scribed by N. Venkata Reddy; R. Sethuraman; G.K. Lal

Publisher: Elsevier Science
Year: 1996
Tongue: English
Weight: 667 KB
Volume: 57
Category: Article
ISSN: 0924-0136
DOI: 10.1016/0924-0136(95)02040-3

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Upper bound analysis of extrusion of axi

Upper bound analysis of extrusion of axisymmetric, piecewise homogeneous tubes

✍ Craig S. Hartley 📂 Article 📅 1973 🏛 Elsevier Science 🌐 English ⚖ 607 KB

Upper bound limit analysis using finite

Upper bound limit analysis using finite elements and linear programming

✍ S. W. Sloan 📂 Article 📅 1989 🏛 John Wiley and Sons 🌐 English ⚖ 890 KB

Upper bound limit analysis using linear

Upper bound limit analysis using linear finite elements and non-linear programming

✍ A. V. Lyamin; S. W. Sloan 📂 Article 📅 2002 🏛 John Wiley and Sons 🌐 English ⚖ 924 KB

Finite element analysis of axisymmetric

Finite element analysis of axisymmetric free jet impingement

✍ George Mejak 📂 Article 📅 1991 🏛 John Wiley and Sons 🌐 English ⚖ 876 KB

Numerical shakedown analysis of axisymme

Numerical shakedown analysis of axisymmetric sandwich shells: An upper bound formulation

✍ Patrick Morelle 📂 Article 📅 1986 🏛 John Wiley and Sons 🌐 English ⚖ 749 KB

Shakedown analysis of axisymmetric elastic-perfectly plastic sandwich shells is performed here using a new upper bound formulation based on a special form of Koiter's theorem concerning piecewise linearized yield surfaces. Starting from finite element techniques and the Tresca sandwich yield conditi

Finite-element analysis of a combined fi

Finite-element analysis of a combined fine-blanking and extrusion process

✍ P. F. Zheng; L. C. Chan; T. C. Lee 📂 Article 📅 2006 🏛 John Wiley and Sons 🌐 English ⚖ 476 KB

This paper presents the characteristics of the combined fine-blanking and extrusion process and gives a detailed analysis of the process with the finite-element method. To carry out the simulation step by step and avoid the tendency to diverge in the calculations, the remeshing, tracing and golden s