During cyclic deformation, temperature measurements were carried out with thermocouples. On the basis of the thermoelastic effect, a thermometric method is described which allows the determination of the elastic part of the total deformation. Thus effective stress changes can be determined. The syst
Uniaxial tension and cyclic tension-compression testing of ceramics
โ Scribed by J.N. Adami; D. Bolsch; J. Bressers; E. Fenske; M. Steen
- Publisher
- Elsevier Science
- Year
- 1991
- Tongue
- English
- Weight
- 882 KB
- Volume
- 7
- Category
- Article
- ISSN
- 0955-2219
No coin nor oath required. For personal study only.
๐ SIMILAR VOLUMES
The mechanical characteristics of coal under uniaxial compressive stress and uniaxial tensile stress are key factors in investigations of the stability of galleries and coal faces, and are vital considerations for the efficient design of coalmines, disaster prevention, and environmental preservation
to shear strain, the chains rupture above some critical strain. Using the electrostatic polarization model and Hertzian con-After the rupture the chains immediately swing back until tact theory, the tensile and compressive behaviors of dilute eleceach is grabbed by another chain. At low shear rates
## CURRENT TOPICS 483 positive lead is connected to the anode through the rubber bushing of the compression seal, and the negative lead is grounded to the aluminum can. Also available with outer plastic insulating sleeve where physical contact with adjacent components is a design requirement.