All-fiber Raman fiber source emitting at 1254 nm was realized. For the first time to pump Raman converter we have applied Yb:Bi pulsed fiber laser. The P-doped fiber was used as an active medium of the Raman converter. The conversion slope efficiency of 70% and the peak power of 12 W were observed.
Ultrafast pulse sources based on multi-mode optical fibers
β Scribed by M.E. Fermann; A. Galvanauskas; M. Hofer
- Publisher
- Springer
- Year
- 2000
- Tongue
- English
- Weight
- 208 KB
- Volume
- 70
- Category
- Article
- ISSN
- 0721-7269
No coin nor oath required. For personal study only.
π SIMILAR VOLUMES
## 5a Figure 9 Average threshold current density versus coupling coefficient for Lasers I, 11, and 111 in MQW structures with two and four wells density a MQW transverse structure with four wells should be used. For higher coupling coefficients ( K , L > 2), a laser with two wells is always the mos
In this paper, we propose and experimentally demonstrate a pressure sensor based on birefringent single-mode fiber F-P cavity using optical heterodyne. The proof of concept device consists of a light source, a polarizer controller, a modulator, a RF generator, a single-mode fiber Fabry-Perot cavity,
## Abstract In this article, a novel multimode interference based optical fiber microphone by employing single modeβmultimodeβsingle mode (SMS) structure is presented. The acoustic vibration is measured by detecting the transmission loss of the SMS structure that attached to a thick aluminum membra