𝔖 Bobbio Scriptorium
✦   LIBER   ✦

Two-stage drawing of high-molecular-weight polyethylene reactor powder

✍ Scribed by Li Hui Wang; Stefano Ottani; Roger S. Porter

Publisher
Elsevier Science
Year
1991
Tongue
English
Weight
462 KB
Volume
32
Category
Article
ISSN
0032-3861

No coin nor oath required. For personal study only.

πŸ“œ SIMILAR VOLUMES

Ultra-drawing of High Molecular Weight P
Ultra-drawing of High Molecular Weight Polyethylene
✍ Lemstra, Piet J. ;Smith, Paul πŸ“‚ Article πŸ“… 2007 πŸ› Wiley (John Wiley & Sons) 🌐 English βš– 900 KB

## Abstract The effective drawability of solution‐cast or ‐spun high molecular weight polyethylene is enhanced significantly in comparison with an identical polymer sample that is crystallised from the melt. The maximum attainable draw ratio, which primarily determines the final mechanical propert

Melt drawing of ultra-high molecular wei
Melt drawing of ultra-high molecular weight polyethylene: Comparison of Ziegler- and metallocene-catalyzed reactor powders
✍ Mitsuhiro Nakae; Hiroki Uehara; Tetsuo Kanamoto; Toshio Ohama; Roger S. Porter πŸ“‚ Article πŸ“… 1999 πŸ› John Wiley and Sons 🌐 English βš– 339 KB πŸ‘ 2 views

The drawing behavior of the ultra-high molecular weight polyethylene (UHMW-PE) melts has been studied by comparing the stress/strain curves for two types of samples as polymerized using conventional Ziegler and newer metallocene catalyst systems. Two UHMW-PE samples, having the same viscosity averag

Die drawing technology of high molecular
Die drawing technology of high molecular weight polyethylene
✍ Y. W. Lee; J. X. Li πŸ“‚ Article πŸ“… 1993 πŸ› John Wiley and Sons 🌐 English βš– 472 KB πŸ‘ 1 views

A comprehensive investigation of the die drawing technology of a high molecular weight polyethylene (HMWPE) rod has been carried out. The effect of draw temperature, draw speed, nominal draw ratio, and exit diameter of the dies has been studied. The oriented HMWPE products were characterized mainly