✦ LIBER ✦

Triple tangent flank milling of ruled surfaces

✍ Scribed by Cornelia Menzel; Sanjeev Bedi; Stephen Mann

Publisher: Elsevier Science
Year: 2004
Tongue: English
Weight: 314 KB
Volume: 36
Category: Article
ISSN: 0010-4485
DOI: 10.1016/s0010-4485(03)00118-0

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Analytical estimation of error in flank

Analytical estimation of error in flank milling of ruled surfaces

✍ Johanna Senatore; Yann Landon; Walter Rubio 📂 Article 📅 2008 🏛 Elsevier Science 🌐 English ⚖ 960 KB

This article introduces a method to estimate geometric error during flank milling of a ruled surface. The various positioning schemes developed by researchers are intended to reduce this geometric error in order to mill with larger sized milling cutters while respecting the tolerance interval. There

Improved positioning of cylindrical cutt

Improved positioning of cylindrical cutter for flank milling ruled surfaces

✍ Hu Gong; Li-Xin Cao; Jian Liu 📂 Article 📅 2005 🏛 Elsevier Science 🌐 English ⚖ 467 KB

Interference-free tool-path planning for

Interference-free tool-path planning for flank milling of twisted ruled surfaces

✍ Jung-Jae Lee; Suk-Hwan Suh 📂 Article 📅 1998 🏛 Springer 🌐 English ⚖ 1001 KB

Cylindrical milling of ruled surfaces

✍ K. Sprott; B. Ravani 📂 Article 📅 2007 🏛 Springer 🌐 English ⚖ 180 KB

Flank milling of a ruled surface with co

Flank milling of a ruled surface with conical tools—an optimization approach

✍ Chenggang Li; Sanjeev Bedi; Stephen Mann 📂 Article 📅 2005 🏛 Springer 🌐 English ⚖ 653 KB

Side milling of ruled surfaces: Optimum

Side milling of ruled surfaces: Optimum positioning of the milling cutter and calculation of interference

✍ J. M. Redonnet; W. Rubio; G. Dessein 📂 Article 📅 1998 🏛 Springer 🌐 English ⚖ 535 KB