TRIP and phase evolution for the pearlitic transformation of the steel 100Cr6 under. step-wise loads
✍ Scribed by M. Wolff; M. Böhm; M. Dalgic; G. Löwisch; J. Rath
- Publisher
- John Wiley and Sons
- Year
- 2006
- Tongue
- English
- Weight
- 131 KB
- Volume
- 37
- Category
- Article
- ISSN
- 0933-5137
No coin nor oath required. For personal study only.
✦ Synopsis
The investigation of complex material behaviour of steel like transformation-induced plasticity (TRIP) and stress-dependent phase transformation (SDPT) is a large field of current research. The simulation of the material behaviour of work-pieces in complex situations requires a knowledge as deep as possible about such phenomena. In addition, there are effects in the case of non-constant stress which cannot be explained by the widely used Leblond model for TRIP. Therefore, we consider a TRIP model taking into account back stress due to TRIP itself. Based on experimental data for the isothermal pearlitic transformation of the steel 100Cr6 (SAE52100) under step-wise loads we calculate material parameters for the extended TRIP model. Regardless of the preliminary character of the performed tests, all experiments show a back-stress effect with a decrease of the TRIP strain after unloading.
Keywords: steel, TRIP, back stress, stress-dependent phase transformation, step-wise load Die Untersuchung von komplexem Materialverhalten von Stahl wie Umwandlungsplastizita ¨t (TRIP -transformation-induced plasticity) und spannungsabha ¨ngigem Umwandlungsverhalten (SDPT -stress-dependent phase transformation) ist bedeutender Gegenstand aktueller Forschung. Die Simulation des Materialverhaltens von Bauteilen in komplexen Situationen erfordert ein mo ¨glichst tiefes Wissen u ¨ber diese Pha ¨nomene. Zusa ¨tzlich treten im Falle nichtkonstanter Spannungen Effekte auf, die mit dem weit verbreiteten Modell der Umwandlungsplastizita ¨t nach Leblond nicht beschrieben werden ko ¨nnen. Deshalb betrachten wir ein Modell der Umwandlungsplastizita ¨t, das eine Ru ¨ckspannung beru ¨cksichtigt, die von ihr selbst hervorgerufen wird. Mittels experimenteller Daten der isothermen perlitischen Umwandlung des Stahls 100Cr6 (SAE52100) unter stufenweiser Belastung berechnen wir die Materialparameter des erweiterten TRIP-Modells. Unabha ¨ngig vom vorla ¨ufigen Charakter der durchgefu ¨hrten Versuche, zeigen alle Experimente einen deutlichen Ru ¨ckspannungseffekt mit einer Abnahme der umwandlungsplastischen Dehnung nach Entlastung.