✦ LIBER ✦

Transport in α-Al2O3 scales on FeAl and NiAl alloys at 1100°C

✍ Scribed by R. Prescott; D.F. Mitchell; G.I. Sproule; M.J. Graham

Publisher: Elsevier Science
Year: 1992
Tongue: English
Weight: 686 KB
Volume: 53-56
Category: Article
ISSN: 0167-2738
DOI: 10.1016/0167-2738(92)90386-4

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Coke effect in mass transport and morpho

Coke effect in mass transport and morphology of Pt-Al2O3 and Ni-Mo-Al2O3 catalysts

✍ F. García-Ochoa; A. Santos 📂 Article 📅 1996 🏛 American Institute of Chemical Engineers 🌐 English ⚖ 784 KB

Spinel, YbFe2O4, and Yb2Fe3O7 types of s

Spinel, YbFe2O4, and Yb2Fe3O7 types of structures for compounds in the In2O3 and Sc2O3A2O3BO systems [A: Fe, Ga, or Al; B: Mg, Mn, Fe, Ni, Cu, or Zn] at temperatures over 1000°C

✍ Noboru Kimizuka; Takahiko Mohri 📂 Article 📅 1985 🏛 Elsevier Science 🌐 English ⚖ 178 KB

The effect of surface relaxation on crys

The effect of surface relaxation on crystal habit: Cases of corundum (α-Al2O3) and Hematite (α-Fe2O3)

✍ P. Hartman 📂 Article 📅 1989 🏛 Elsevier Science 🌐 English ⚖ 413 KB

Subsolidus Phase Relationships in the Sy

Subsolidus Phase Relationships in the System Fe2O3—Al2O3—TiO2 Between 1000 °C and 1300 °C.

✍ Mark I. Pownceby; Keri K. Constanti-Carey; Michael J. Fisher-White 📂 Article 📅 2003 🏛 John Wiley and Sons ⚖ 71 KB 👁 1 views

Outgassing of Al2O3 and BeO in vacuum at

Outgassing of Al2O3 and BeO in vacuum at 540°C and 870°C

✍ R McRae; H Lloyd 📂 Article 📅 1967 🏛 Elsevier Science 🌐 English ⚖ 178 KB

Void formation and filling under alumina

Void formation and filling under alumina scales formed on Fe–20Cr–5Al based alloys and coatings, oxidised at temperatures up to 1200 °C

✍ D. J. Potter; H. Al-Badairy; G. J. Tatlock; M. J. Bennett 📂 Article 📅 2008 🏛 John Wiley and Sons 🌐 German ⚖ 389 KB

## Abstract During the oxidation, in laboratory air, of thin foils of Fe–20Cr–5Al based alloys, voids were formed in the substrate beneath the outer protective alumina scale after times varying from 50 h at 900 °C to 10 min at 1200 °C. Once the substrate aluminium level had dropped below a critical