Transparent mullite ceramic from single-phase gel by Spark Plasma Sintering

✍ Scribed by Guimin Zhang; Yucheng Wang; Zhengyi Fu; Hao Wang; Weiming Wang; Jinyong Zhang; Soo Wohn Lee; Kochi Niihara

• Publisher: Elsevier Science
• Year: 2009
• Tongue: English
• Weight: 987 KB
• Volume: 29
• Category: Article
• ISSN: 0955-2219
• DOI: 10.1016/j.jeurceramsoc.2009.04.012

✦ Synopsis

Monophasic mullite precursors with composition of 3Al 2 O 3 •2SiO 2 (3:2) were synthesized and then were sintered by Spark Plasma Sintering (SPS) to form transparent mullite ceramics. The precursor powders were calcined at 1100 • C for 2 h. The sintering was carried out by heating the sample to 1450 • C, holding for 10 min. The sintered body obtained a relative bulk density of above 97.5% and an infrared transmittance of 75-82% in wavelength of 2.5-4.3 m without any additive. When the precursor powders were calcined at below 1100 • C, it was unfavorable for completely eliminating the residual OH, H 2 O and organic compound. However, when calcined temperature was too high, it was unfavorable either for full densification due to the absence of viscous flow of amorphous phase. At the same calcined temperature, the transmittance of sintered body was decreased with the increase of the sintering temperature above 1450 • C owing to the elongated grain growth.