In Part I, a numerical model for coupled heat and moisture transfer in a run-around heat and moisture exchanger with a liquid desiccant coupling fluid is developed. The numerical model is two dimensional, transient and is formulated using the finite difference method with an implicit time discretiza
Transient behavior of run-around heat and moisture exchanger system. Part IІ: Sensitivity studies for a range of initial conditions
✍ Scribed by Mehran Seyed-Ahmadi; Blake Erb; Carey J. Simonson; Robert W. Besant
- Publisher
- Elsevier Science
- Year
- 2009
- Tongue
- English
- Weight
- 615 KB
- Volume
- 52
- Category
- Article
- ISSN
- 0017-9310
No coin nor oath required. For personal study only.
✦ Synopsis
Part I of this paper [17] developed and verified the numerical model for simultaneous heat and moisture transfer in the run-around membrane energy exchanger (RAMEE) system to determine the transient behavior of the system under different initial and operating conditions.
This paper presents the transient response of the RAMEE system for step changes in the inlet supply air temperature and humidity ratio. Also the system quasi-steady state operating conditions are predicted as the system approaches its asymptotic operating condition. The transient responses are predicted with changes in various parameters. These include: the number of heat transfer units, thermal capacity ratio, heat loss/gain ratio, storage volume ratio and the normalized initial salt solution concentration. It is shown that the storage volume ratio and the initial salt solution concentration have significant impacts on the transient response of the system and heat transfer between the RAMEE system and the surrounding environment can change the system quasi-steady conditions substantially.
📜 SIMILAR VOLUMES