✦ LIBER ✦

Toughening of trifunctional epoxy using an epoxy-functionalized hyperbranched polymer

✍ Scribed by D. Ratna; R. Varley; G. P. Simon

Publisher: John Wiley and Sons
Year: 2003
Tongue: English
Weight: 205 KB
Volume: 89
Category: Article
ISSN: 0021-8995
DOI: 10.1002/app.12059

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Influence of an hyperbranched aliphatic

Influence of an hyperbranched aliphatic polyester on the cure kinetic of a trifunctional epoxy resin

✍ Mariaenrica Frigione; Emanuela Calò 📂 Article 📅 2007 🏛 John Wiley and Sons 🌐 English ⚖ 364 KB

Toughening of epoxy resin by functional-

Toughening of epoxy resin by functional-terminated polyurethanes and/or semicrystalline polymer powders

✍ Huei-Hsiung Wang; Jung-Chieh Chen 📂 Article 📅 2001 🏛 John Wiley and Sons 🌐 English ⚖ 358 KB 👁 1 views

## Abstract Hydroxyl‐, amine‐, and anhydride‐terminated polyurethane (PU) prepolymers, which were synthesized from polyether [poly(tetramethylene glycol)] diol, 4,4′‐diphenylmethane diisocyanate, and a coupling agent, bisphenol‐A (Bis‐A), 4,4′‐diaminodiphenyl sulphone (DDS), or benzophenonetetracar

Characteristics of medical polymer based

Characteristics of medical polymer based on an epoxy resin system—Curing reaction characteristics of biphenol epoxy monomer with phenolic functional hardeners

✍ S. W. Kim; M. G. Lu; M. J. Shim 📂 Article 📅 2001 🏛 John Wiley and Sons 🌐 English ⚖ 175 KB 👁 2 views

A solution for the full impregnation of

A solution for the full impregnation of asbestos: The use of an epoxy polymer resin

✍ A. F. Gualtieri 📂 Article 📅 2000 🏛 John Wiley and Sons 🌐 English ⚖ 320 KB 👁 1 views

Asbestos has been identified as priority substance for risk reduction and pollution prevention given its carcinogenic effects. Because of its wide occupational exposures and widespread use in commerce in the past, there is a big concern that it may present a general health hazard. Therefore, the ide

Toughening of epoxy resins using particl

Toughening of epoxy resins using particles prepared by emulsion polymerization: effects of particle surface functionality, size and morphology on impact fracture properties

✍ Day, Richard J.; Lovell, Peter A.; Pierre, Dorian 📂 Article 📅 1997 🏛 John Wiley and Sons 🌐 English ⚖ 442 KB 👁 2 views

A range of sub-micron size three-layer toughening particles have been prepared by sequential emulsion polymerization, each type of particle comprising a glassy polymer core, a rubbery inter-layer and an outer layer of glassy polymer, which was functionalized using either glycidyl methacrylate or met