Toughened electrospun nanofibers from crosslinked elastomer-thermoplastic blends
✍ Scribed by Jian Fang; Tong Lin; Wendy Tian; Arnav Sharma; Xungai Wang
- Publisher
- John Wiley and Sons
- Year
- 2007
- Tongue
- English
- Weight
- 431 KB
- Volume
- 105
- Category
- Article
- ISSN
- 0021-8995
No coin nor oath required. For personal study only.
✦ Synopsis
Abstract
A crosslink‐able elastomeric polyester urethane (PEU) was blended with a thermoplastic, polyacrylonitrile (PAN), and electrospun into nanofibers. The effects of the PEU/PAN ratio and the crosslinking reaction on the morphology and the tensile properties of the as‐spun fiber mats were investigated. With the same overall polymer concentration (9 wt %), the nanofiber containing higher composition of PEU shows a slight decrease in the average fiber diameter, but the tensile strength, the elongation at break and tensile modulus of the nanofiber mats are all improved. These tensile properties are further enhanced by slight crosslinking of the PEU component within the nanofibers. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 2007
📜 SIMILAR VOLUMES
## Abstract **Summary:** Electrospinning of polymer blends offers the potential to prepare functional nanofibers for use in a variety of applications. This work focused on control of the internal morphology of nanofibers prepared by electrospinning polymer blends to obtain core‐sheath structures. P
The dynamic mechanical properties of thermoplastic elastomers from polypropylene natural rubber blends have been evaluated with special reference to the effect of blend ratio and extent of dynamic crosslinking of the elastomer phase. The effects of HAF black and silica fillers have also been studied
## Abstract In the present work, thermoplastic elastomer (TPE)–clay nanocomposites (TPN) based on different rubber–plastic blends from ethylene–octene copolymer [Engage]–Polypropylene and brominated poly(isobutylene‐__co__‐paramethyl styrene)–nylon 6 were prepared by melt blending. Hexadecyltrimeth