✦ LIBER ✦

Titanium-oxide interface structures formed by degassing and anodization processes

✍ Scribed by Y. Tanaka

Book ID: 106390706
Publisher: Springer
Year: 2005
Tongue: English
Weight: 612 KB
Volume: 40
Category: Article
ISSN: 0022-2461
DOI: 10.1007/s10853-005-2668-2

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Surface characteristics and bioactivity

Surface characteristics and bioactivity of oxide films formed by anodic spark oxidation on titanium in different electrolytes

✍ Ho-Jun Song; Seong-Hwan Park; Sang-Hun Jeong; Yeong-Joon Park 📂 Article 📅 2009 🏛 Elsevier Science 🌐 English ⚖ 738 KB

Porous oxide films were fabricated on commercially pure titanium (CP-Ti) using an anodic spark oxidation technique with different electrolytes, 1 M H 2 SO 4 , 1M H 3 PO 4 , and 1 M CH 3 COOH. The micro-morphology, surface roughness, and crystalline structure were evaluated by scanning electron micro

Electrochemical and structural investiga

Electrochemical and structural investigations of oxide films anodically formed on ruthenium-plated titanium electrodes in sulfuric acid

✍ Chi-Chang Hu; Hong-Ru Chiang; Chen-Ching Wang 📂 Article 📅 2003 🏛 Springer 🌐 English ⚖ 374 KB

Electrochemical and morphological analys

Electrochemical and morphological analyses on the titanium surface modified by shot blasting and anodic oxidation processes

✍ Szesz, Eduardo M.; Pereira, Bruno L.; Kuromoto, Neide K.; Marino, Claudia E.B.; 📂 Article 📅 2013 🏛 Elsevier Science 🌐 English ⚖ 731 KB

Characterization of thin hydroxyapatite

Characterization of thin hydroxyapatite layers formed on anodic titanium oxide films containing Ca and P by hydrothermal treatment

✍ Ishizawa, Hitoshi ;Ogino, Makoto 📂 Article 📅 1995 🏛 John Wiley and Sons 🌐 English ⚖ 1021 KB

An anodic titanium oxide film containing Ca and P (AOFCP) was formed on commercially pure titanium which was anodized in an electrolytic solution of dissolved p-glycerophosphate (P-GP) and calcium acetate (CA). Hydroxyapatite (HA) crystals were precipitated by hydrothermally heating the AOFCP at 300

Surface modification of titanium by anod

Surface modification of titanium by anodic oxidation in phosphoric acid at low potentials. Part 1. Structure, electronic properties and thickness of the anodic films

✍ Gomez Sanchez, A.; Schreiner, W.; Duffó, G.; Ceré, S. 📂 Article 📅 2013 🏛 John Wiley and Sons 🌐 English ⚖ 992 KB

Optimization of anodic oxidation and Cu–

Optimization of anodic oxidation and Cu–Cr oxide catalyst preparation on structured aluminum plates processed by electro discharge machining

✍ I.Z. Ismagilov; R.P. Ekatpure; L.T. Tsykoza; E.V. Matus; E.V. Rebrov; M.H.J.M. d 📂 Article 📅 2005 🏛 Elsevier Science 🌐 English ⚖ 443 KB