## Abstract A design method for DBSβTV reception antennas with tilted beam using a radial feed line with a slot radiating array is proposed. A cylindrical TEM wave excites the slots and must be placed eccentrically in order to produce a tilted beam. The proposed design method allows us to obtain go
Tilted beam slot loop antenna
β Scribed by B. Subbarao; V. F. Fusco
- Book ID
- 102517164
- Publisher
- John Wiley and Sons
- Year
- 2002
- Tongue
- English
- Weight
- 143 KB
- Volume
- 34
- Category
- Article
- ISSN
- 0895-2477
No coin nor oath required. For personal study only.
β¦ Synopsis
Abstract
This Letter describes a slot loop antenna that is partially short circuited in order to create beam tilt in the farβfield radiation for the purpose of reduced SAR. Here the characteristics of a partly shorted slot loop constructed on lowβdielectricβconstant PCB material, Ξ΅~r~ = 2.33 designed to operate at 2400 MHz are illustrated. The loop is fed from a microstrip line, removing the requirement for the balun feed arrangement normally required for loop antennas. The resulting antenna exhibits a 30Β° beam tilt and has an estimated gain of 6 dBi. Β© 2002 Wiley Periodicals, Inc. Microwave Opt Technol Lett 34: 332β333, 2002; Published online in Wiley InterScience (www.interscience.wiley.com). DOI 10.1002/mop.10453
π SIMILAR VOLUMES
## Abstract A printed square slot loop antenna capable of radiating slant 45βdegree polarized signals over a wideband is presented. A radial wideband stub feeds the square slot loop at the diagonal and the antenna exhibits an impedance and radiation bandwidth of more than octaveband (1.7 to 3.5 GHz