✦ LIBER ✦

TiC/Ti3SiC2 composite prepared by mechanical alloying

✍ Scribed by Baoyan Liang; Xin Han; Qin Zou; Yucheng Zhao; Mingzhi Wang

Book ID: 113656460
Publisher: Elsevier Science
Year: 2009
Tongue: English
Weight: 441 KB
Volume: 27
Category: Article
ISSN: 0263-4368
DOI: 10.1016/j.ijrmhm.2008.10.015

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Ti3SiC2/TiC composites prepared by PDS

✍ S. Konoplyuk; T. Abe; T. Uchimoto; T. Takagi 📂 Article 📅 2005 🏛 Springer 🌐 English ⚖ 1009 KB

Synthesis of Ti3SiC2/TiC composites from

Synthesis of Ti3SiC2/TiC composites from TiH2/SiC/TiC powders

✍ S. Konoplyuk; T. Abe; T. Uchimoto; T. Takagi 📂 Article 📅 2005 🏛 Elsevier Science 🌐 English ⚖ 244 KB

Mechanical-Alloying-Assisted Synthesis o

Mechanical-Alloying-Assisted Synthesis of Ti3SiC2 Powder

✍ Jing-Feng Li; Toshiro Matsuki; Ryuzo Watanabe 📂 Article 📅 2004 🏛 John Wiley and Sons 🌐 English ⚖ 346 KB

In situ synthesis of Ti3SiC2/SiC composi

In situ synthesis of Ti3SiC2/SiC composite by displacement reaction of Si and TiC

✍ Shi-Bo Li; Jian-Xin Xie; Li-Tong Zhang; Lai-Fei Cheng 📂 Article 📅 2004 🏛 Elsevier Science 🌐 English ⚖ 248 KB

Mechanical properties and oxidation resi

Mechanical properties and oxidation resistance of Ti3SiC2/SiC composite synthesized by in situ displacement reaction of Si and TiC

✍ Shi-Bo Li; Jian-Xin Xie; Li-Tong Zhang; Lai-Fei Cheng 📂 Article 📅 2003 🏛 Elsevier Science 🌐 English ⚖ 614 KB

Preparation and mechanical properties of

Preparation and mechanical properties of Fe3Al(Ti)/TiC composites

✍ Jia Li; Qiang Liu; Rui-xia Shi; Yu Wen; Yan-sheng Yin 📂 Article 📅 2008 🏛 Elsevier Science 🌐 English ⚖ 797 KB

Near fully dense Fe 3 Al(10Ti)/TiC composites were synthesized by MA and hot-pressing sintering methods. Based on the Orowan strengthening effect offered by the nano-TiC particles, higher three-point bending strength and hardness values, 1310 MPa and 90 HRA, were achieved in Fe 3 Al(10Ti)/40 vol%TiC