✦ LIBER ✦

Three-way catalytic activity of alumina-supported copper catalysts modified by rhodium

✍ Scribed by Xavier Courtois; Vincent Perrichon; Michel Primet

Publisher: Elsevier Science
Year: 2000
Tongue: English
Weight: 237 KB
Volume: 3
Category: Article
ISSN: 1387-1609
DOI: 10.1016/s1387-1609(00)01143-9

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Effect of synthesis method on the proper

Effect of synthesis method on the properties of ceria–zirconia modified alumina and the catalytic performance of its supported Pd-only three-way catalyst

✍ Qiuyan Wang; Zhenguo Li; Bo Zhao; Guangfeng Li; Renxian Zhou 📂 Article 📅 2011 🏛 Elsevier Science 🌐 English ⚖ 795 KB

IR studies and hydrogenation catalytic a

IR studies and hydrogenation catalytic activity of heterogeneous catalysts prepared by thermal treatments of a face-bridged triruthenium carbonyl cluster supported on silica and alumina

✍ Javier A. Cabeza; JoséM. Fernández-Colinas; Agnès Choplin; Albert Theolier 📂 Article 📅 1995 🏛 Elsevier Science 🌐 English ⚖ 558 KB

Cyclopropanation reactions catalysed by

Cyclopropanation reactions catalysed by copper and rhodium complexes homogeneous and heterogenised on a modified USY-zeolite. Influence of the catalyst on the catalytic profile

✍ M.J. Alcón; A. Corma; M. Iglesias; F. Sánchez 📂 Article 📅 1999 🏛 Elsevier Science 🌐 English ⚖ 143 KB

Methanol steam reforming in supported Pd

Methanol steam reforming in supported Pd membrane reactor The supported Pd membrane is promising for the production of high-purity hydrogen from catalytic steam reforming of methanol. At the 35°C reaction temperature, the catalyst activity and stability are promoted by increasing the alumina content. Here a compact doublejacketed reactor has generated high-purity hydrogen directly from steam reforming of methanol, with no need for external purification and a much higher recovery yield.

📂 Article 📅 2001 🏛 Elsevier Science 🌐 English ⚖ 110 KB

environments was investigated. The corrosion rate is higher under 'outlet' conditions at 700°C compared to standard conditions at 650°C and 'inlet' conditions at 600°C. The corrosion potential increases with time when a protective corrosion layer is formed. Eventually it reaches a more positive pote