Three-dimensional phase contrast velocity mapping acquisition improves wall shear stress estimation in vivo

✍ Scribed by Sheng Ping Wu; Steffen Ringgaard; Erik Morre Pedersen

• Publisher: Elsevier Science
• Year: 2004
• Tongue: English
• Weight: 314 KB
• Volume: 22
• Category: Article
• ISSN: 0730-725X
• DOI: 10.1016/j.mri.2004.01.002

✦ Synopsis

The purpose of this study was to evaluate and apply high-resolution three-dimensional phase contrast mapping for estimation of wall shear stress in vivo. A silicon pipe of 8 mm diameter with a 8.3 ml/s steady flow and the entrance of the carotid bifurcation in 10 young healthy volunteers aged 23.6 Ϯ 3.1 years was studied. Very high resolution three-dimensional and two-dimensional phase contrast mapping sequences with spatial resolutions of 0.31 ϫ 0.31 ϫ 1.5 mm 3 and 0.31 ϫ 0.31 ϫ 3 mm 3 , respectively, were compared in vivo and in vitro. Wall shear stress was calculated using multi-sectored, three-dimensional paraboloid fitting. In comparison to the two-dimensional measurements, the three-dimensional method with only half the slice thickness gave higher signal-to-noise ratio and velocity-to-noise ratios both in vivo and in vitro. Wall shear stress derived from the three-dimensional velocity measurements did not differ from the twodimensional velocity measurements either in vitro or in vivo. Mean wall shear stress was lowest and oscillatory shear index was highest at the outer wall, towards the carotid bifurcation. Three-dimensional velocity mapping increases resolution and image quality and allows estimation of wall shear stress patterns circumferentially and longitudinally in human arteries.