The isolation of the vibration due to moving loads using pile rows embedded in a poroelastic half-space is investigated in this study. Based on Biot's theory and integral transform method, the free field solution for a moving load applied on the surface of a poroelastic half-space and the fundamenta
Three dimensional FEM of moving coordinates for the analysis of transient vibrations due to moving loads
β Scribed by Wei Zhai; Erxiang Song
- Publisher
- Elsevier Science
- Year
- 2010
- Tongue
- English
- Weight
- 993 KB
- Volume
- 37
- Category
- Article
- ISSN
- 0266-352X
No coin nor oath required. For personal study only.
π SIMILAR VOLUMES
In order to accurately determine the dynamic response of cross-ply laminated thick plates subjected to moving load, a solution procedure based on the three-dimensional (3D) elasticity theory is presented. Plates with simply supported edges and subjected to point moving load are considered. The layer
The dynamic behaviour of a saggy suspension cable under a moving load was investigated. First of all, the updated Lagrangian formulation and the finite element method were used to derive the property matrices of a saggy suspension cable in order to define the discretized equations of motion. Then, t
A new correction procedure for dynamic analysis of linear, proportionally damped, continuous systems under traveling concentrated loads is proposed; both cases of non-parametric (moving forces) and parametric (moving mass) loads are considered. Improvement in the evaluation of the dynamic response i
The propagation of waves through homogeneous or layered soil is calculated based on half-space theory. The moving dynamic loads of a train are approximated by fixed dynamic loads and the wave field can be calculated if the spectrum of the dynamic train loads is known. In addition to this dynamic wav
The solution of high-speed transient inviscid compressible Β―ow problems in three dimensions is considered. Discretization of the spatial domain is accomplished by the use of tetrahedral elements generated by Delaunay triangulation with automatic point creation. Methods of adapting the mesh to allow