✦ LIBER ✦

Three-dimensional elastic analysis of a composite double cantilever beam specimen

✍ Scribed by RAJU, I. S.; HIVAKUMAR, K. N.; REWS, J. H.

Book ID: 121790293
Publisher: American Institute of Aeronautics and Astronautics
Year: 1988
Tongue: English
Weight: 942 KB
Volume: 26
Category: Article
ISSN: 0001-1452
DOI: 10.2514/3.10068

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Evaluation of elastic work factor for a

Evaluation of elastic work factor for a double cantilever beam specimen

✍ K. Y. Rhee 📂 Article 📅 1994 🏛 Springer 🌐 English ⚖ 181 KB

Stress analysis of the double cantilever

Stress analysis of the double cantilever beam specimen

✍ J.M. Whitney 📂 Article 📅 1985 🏛 Elsevier Science 🌐 English ⚖ 679 KB

Evaluation of fracture energy GIC using

Evaluation of fracture energy GIC using a double cantilever beam fibre composite specimen

✍ B. Nageswara Rao; A.R. Acharya 📂 Article 📅 1995 🏛 Elsevier Science 🌐 English ⚖ 322 KB

Akstraet--Studies are made to determine the mode I interlaminar fracture toughness, or critical energy release rate, Gtc of composites using a slender double cantilever beam (DCB) specimen. Fracture analysis has been carried out on DCB specimens made of carbon-fibre/PEEK and carbon-fibre/epoxy compo

Analysis of unidirectional (0°) fiber-re

Analysis of unidirectional (0°) fiber-reinforced laminated composite double cantilever beam specimen using higher order beam theories

✍ D.V.T.G. Pavan Kumar; B.K. Raghu Prasad 📂 Article 📅 2008 🏛 Elsevier Science 🌐 English ⚖ 266 KB

Mathematical models, for the stress analysis of unidirectional (0°) fiber-reinforced laminated composite double cantilever beam (DCB) specimen using classical beam theory, first and higher order shear deformation beam theories, have been developed to determine the mode I strain energy release rate (

Analysis of a mixed mode fracture specim

Analysis of a mixed mode fracture specimen: the asymmetric double cantilever beam

✍ F. Xiao; C.-Y. Hui; E. J. Kramer 📂 Article 📅 1993 🏛 Springer 🌐 English ⚖ 938 KB

An asymmetric double cantilever beam (ADCB) is a simple but effective specimen for the measurement of polymer/polymer and polymer/non-polymer bimaterial interface fracture toughness. In order to characterize fully the bimaterial interface strength, and to control the crack trajectory, the critical e

Damage and crack growth analysis of the

Damage and crack growth analysis of the double cantilever beam specimen

✍ Ulf Stigh 📂 Article 📅 1988 🏛 Springer Netherlands 🌐 English ⚖ 198 KB