✦ LIBER ✦

Thermoplastic urethane elastomers. I. Effects of soft-segment variations

✍ Scribed by C. G. Seefried Jr.; J. V. Koleske; F. E. Critchfield

Publisher: John Wiley and Sons
Year: 1975
Tongue: English
Weight: 460 KB
Volume: 19
Category: Article
ISSN: 0021-8995
DOI: 10.1002/app.1975.070190912

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Thermoplastic urethane elastomers. II. E

Thermoplastic urethane elastomers. II. Effects of variations in hard-segment concentration

✍ C. G. Seefried Jr.; J. V. Koleske; F. E. Critchfield 📂 Article 📅 1975 🏛 John Wiley and Sons 🌐 English ⚖ 498 KB

Thermoplastic urethane elastomers. III.

Thermoplastic urethane elastomers. III. Effects of variations in isocyanate structure

✍ C. G. Seefried Jr.; J. V. Koleske; F. E. Critchfield 📂 Article 📅 1975 🏛 John Wiley and Sons 🌐 English ⚖ 350 KB

Preparation and properties of segmented

Preparation and properties of segmented thermoplastic polyurethane elastomers with two different soft segments

✍ Han-Do Kim; Tae-Jung Lee; Jae-Ho Huh; Dong-Jin Lee 📂 Article 📅 1999 🏛 John Wiley and Sons 🌐 English ⚖ 214 KB 👁 2 views

Thermoplastic polyurethane elastomers were prepared from 4,4-diphenylmethane diisocyanate (MDI)/1,4-butanediol (BD)/poly(propylene glycol) (PPG) and MDI/BD/poly(oxytetramethylene glycol) (PTMG). The MDI/BD-based hard-segment content of polyurethane prepared in this study was of 39 -65 wt %. These po

Comparison of properties of thermoplasti

Comparison of properties of thermoplastic polyurethane elastomers with two different soft segments

✍ Han Do Kim; Je Ho Huh; Eun Young Kim; Cha Cheol Park 📂 Article 📅 1998 🏛 John Wiley and Sons 🌐 English ⚖ 212 KB 👁 2 views

Two series of thermoplastic polyurethane elastomers [poly(propylene glycol) (PPG) based PP samples and poly(oxytetramethylene)glycol (PTMG) based PT samples] were synthesized from isophorone diisocyanate (IPDI)/1,4-butanediol (BD)/ PPG and IPDI/BD/PTMG. The IPDI/BD based hard segments contents of po

Polyether-based thermoplastic polyuretha

Polyether-based thermoplastic polyurethanes. I. Effect of the hard-segment content

✍ R. J. Zdrahala; R. M. Gerkin; S. L. Hager; F. E. Critchfield 📂 Article 📅 1979 🏛 John Wiley and Sons 🌐 English ⚖ 419 KB 👁 1 views

Ionic thermoplastic elastomer based on m

Ionic thermoplastic elastomer based on maleated epdm rubber. I. Effect of zinc stearate

✍ Santanu Datta; S. K. De; E. G. Kontos; J. M. Wefer 📂 Article 📅 1996 🏛 John Wiley and Sons 🌐 English ⚖ 669 KB

Neutralization of maleated EPDM rubber by zinc oxide results in an ionic elastomer. The rate and extent of the neutralization reaction increase by addition of stearic acid. Although the rubber is not easy processable as such, incorporation of zinc stearate at a loading of 30 phr makes the rubber beh