✦ LIBER ✦

Thermoplastic modification of urea–formaldehyde wood adhesives to improve moisture resistance

✍ Scribed by Jae-Woo Kim; Karana Carlborn; Laurent M. Matuana; Patricia A. Heiden

Publisher: John Wiley and Sons
Year: 2006
Tongue: English
Weight: 238 KB
Volume: 101
Category: Article
ISSN: 0021-8995
DOI: 10.1002/app.23654

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Fluorinated polyether additives to impro

Fluorinated polyether additives to improve the performance of urea–formaldehyde adhesives for wood panels

✍ H. R. Mansouri; R. R. Thomas; S. Garnier; A. Pizzi 📂 Article 📅 2007 🏛 John Wiley and Sons 🌐 English ⚖ 104 KB 👁 2 views

Thermoplastic polymers as modifiers for

Thermoplastic polymers as modifiers for urea-formaldehyde (UF) wood adhesives. II. Procedures for the preparation and characterization of thermoplastic-modified UF wood composites

✍ P. Rachtanapun; P. Heiden 📂 Article 📅 2003 🏛 John Wiley and Sons 🌐 English ⚖ 474 KB 👁 2 views

Low addition of melamine salts for impro

Low addition of melamine salts for improved melamine-urea-formaldehyde adhesive water resistance

✍ M. Zanetti; A. Pizzi 📂 Article 📅 2003 🏛 John Wiley and Sons 🌐 English ⚖ 85 KB 👁 1 views

## Abstract The addition of melamine acetate salts to an adhesive glue mix can allow the use of melamine–urea–formaldehyde (MUF) resins of lower melamine contents (rather than just urea–formaldehyde resins) and lower total amounts of melamine. Performances can be obtained that are characteristic of

Thermoplastic polymers as modifiers for

Thermoplastic polymers as modifiers for urea-formaldehyde (UF) wood adhesives. I. Procedures for the preparation and characterization of thermoplastic-modified UF suspensions

✍ P. Rachtanapun; P. Heiden 📂 Article 📅 2003 🏛 John Wiley and Sons 🌐 English ⚖ 131 KB 👁 2 views

Polyamine-modified urea-formaldehyde res

Polyamine-modified urea-formaldehyde resins. II. Resistance to stress induced by moisture cycling of solid wood joints and particleboard

✍ Robert O. Ebewele; Bryan H. River; George E. Myers; James A. Koutsky 📂 Article 📅 1991 🏛 John Wiley and Sons 🌐 English ⚖ 591 KB

Low-volatility acetals to upgrade the pe

Low-volatility acetals to upgrade the performance of melamine–urea–formaldehyde wood adhesive resins

✍ M. Zanetti; A. Pizzi; P. Faucher 📂 Article 📅 2004 🏛 John Wiley and Sons 🌐 English ⚖ 75 KB 👁 2 views

## Abstract 1,1,2,2‐Tetramethoxyethane (TME), a high boiling point acetal derived from glyoxol, lhas been shown to upgrade the performance of melamine‐urea‐formaldehyde (MUF) and some UF resins used for wood adhesives. This affords the possibility of decreasing the percentage of resin used in the p