𝔖 Bobbio Scriptorium
✦   LIBER   ✦

Thermomechanical properties of Ni-Al3O3 metal matrix composites produced by electroforming

✍ Scribed by M. Verelst; J.P. Bonino; M. Brieu; A. Rousset

Publisher
Elsevier Science
Year
1995
Tongue
English
Weight
540 KB
Volume
191
Category
Article
ISSN
0921-5093

No coin nor oath required. For personal study only.

πŸ“œ SIMILAR VOLUMES

Fabrication of Ni–Al2O3 composite microc
Fabrication of Ni–Al2O3 composite microcomponent by electroforming
✍ X.Y. Wei; Z.G. Zhu; P.D. Prewett; K. Jiang πŸ“‚ Article πŸ“… 2007 πŸ› Elsevier Science 🌐 English βš– 696 KB

Thick nickel-alumina (Ni-Al 2 O 3 ) composite microcomponents containing dispersed alumina nanoparticles were fabricated by a combination of UV lithography and electroforming, using Shipley BPR100 resist to fabricate the micromoulds. Tests show that the microhardness of composite microcomponents is

Improving the mechanical properties of A
Improving the mechanical properties of Al2O3/Ni laminated composites by adding Ni particles in Al2O3 layers
✍ Kai Hui Zuo; Dong Liang Jiang; Qing Ling Lin; Yu-ping Zeng πŸ“‚ Article πŸ“… 2007 πŸ› Elsevier Science 🌐 English βš– 783 KB

The (Al 2 O 3 + Ni) composite, (Al 2 O 3 + Ni)/Ni and Al 2 O 3 /(Al 2 O 3 + Ni)/Ni laminated materials were prepared by aqueous tape casting and hot pressing. Results indicated that the (Al 2 O 3 + Ni) composite had higher strength and fracture toughness than those of pure Al 2 O 3 . The fracture to

Dry sliding wear behavior of in situ Al–
Dry sliding wear behavior of in situ Al–Al4C3 metal matrix composite produced by mechanical alloying technique
✍ Halil Arik; Yusuf Ozcatalbas; Mehmet Turker πŸ“‚ Article πŸ“… 2006 πŸ› Elsevier Science βš– 570 KB

Dry sliding wear behavior of in situ Al-Al 4 C 3 composite produced by mechanical alloying technique was examined. Mechanically alloyed Al-C powders were compacted at 650 MPa to produce the blanks with the size of ΓΈ10 β€’ 25 mm. These blanks were then sintered at 650 Β°C for 20 h and MMC samples with t