Electrically conductive alumina ceramic has been successfully fabricated by sintering of dried gelcast alumina in an inert atmosphere. The process was developed similar to the conventional gelcasting method except for varying the amount of monomer in the premix solution. The sintering treatment was
Thermogravimetric characterization of gelcast alumina composites
โ Scribed by J. Dweck; R. Fischer; E. Fischer
- Publisher
- Springer Netherlands
- Year
- 1997
- Tongue
- English
- Weight
- 308 KB
- Volume
- 49
- Category
- Article
- ISSN
- 0022-5215
No coin nor oath required. For personal study only.
๐ SIMILAR VOLUMES
A water-soluble epoxy resin combined with a polyamine hardener was developed to consolidate foamed suspensions to manufacture alumina foams. This gelling system could be carried out in air atmosphere, thus more convenient than those based on acrylamide derivatives. The influence of solid loading on
An acrylic monomer of low toxicity containing two hydroxyl groups has been synthesized and used for gelcasting in water. The results have been compared to those achieved with the use of a commercially available monomer (2-hydroxyethyl acrylate). Due to the chemical structure of the synthesized monom
The optical properties in the UV-visible region of poly (ethylene oxide) polymer containing 0%, 5%, 10% and 15% by weight aluminum oxide (Al 2 O 3 ) are reported. The optical results obtained were analyzed in terms of the absorption formula for non-crystalline materials. The absorption coefficient a