Thermodynamic equilibrium analysis of combined carbon dioxide reforming with steam reforming of methane to synthesis gas
✍ Scribed by Şeyma Özkara-Aydınoğlu
- Publisher
- Elsevier Science
- Year
- 2010
- Tongue
- English
- Weight
- 522 KB
- Volume
- 35
- Category
- Article
- ISSN
- 0360-3199
No coin nor oath required. For personal study only.
✦ Synopsis
Thermodynamics equilibrium analysis of carbon dioxide reforming of methane combined with steam reforming to synthesis gas was studied by Gibbs free energy minimization method to understand the effects of process variables such as temperature, pressure and inlet CH 4 /H 2 O/CO 2 ratios on product distributions. For this purpose, the calculations were carried out at total pressures of 1 and 20 bar, and at ranges of temperature and steam-tocarbon ratios of 200e1200 C and 0e0.50, respectively. The results revealed that carbon dioxide reforming of methane combined with steam reforming process was controlled by different reactions with regard to the operating temperature, pressure and varying feed compositions. The H 2 /CO product ratio could be modified by changing the relative concentration of steam and CO 2 in the feed, temperature and pressure, depending on the downstream application.
📜 SIMILAR VOLUMES
Carbon dioxide reforming of methane to synthesis gas has been investigated over supported Ni catalysts in the temperature range of 5004350°C. Addition of CaO ( 10 mol%) promoter to the Nil y-A1203 resulted in an increase of reaction rate and an improvement of catalyst stability, which may be related
Silicon nitride supported nickel catalyst prepared by impregnation using nickel nitrate solution was employed for the carbon dioxide reforming of methane. The catalyst was tested at 800 C under atmospheric pressure. The influences of Ni loading and calcination temperature on the catalytic performanc
Thermodynamics was applied to investigate propane dry reforming (DR) and steam reforming (SR). Equilibrium calculations employing the Gibbs free energy minimization were performed upon a wide range of pressure (1e5 atm), temperature (700e1100 K), carbon dioxide to propane ratio (CPR, 1e12) and water