✦ LIBER ✦

Thermodynamic and kinetic analyses of time-temperature-sensitization diagrams in austenitic stainless steels

✍ Scribed by M. Grujicic; S. Tangrila

Publisher: Elsevier Science
Year: 1991
Tongue: English
Weight: 373 KB
Volume: 142
Category: Article
ISSN: 0921-5093
DOI: 10.1016/0921-5093(91)90664-9

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Entry, transport and absorption of hydro

Entry, transport and absorption of hydrogen in low-temperature plasma nitrided austenitic stainless steel

✍ T Zakroczymski; J Flis; N Lukomski; J Mankowski 📂 Article 📅 2001 🏛 Elsevier Science 🌐 English ⚖ 414 KB

Thermal expansion of the austenitic stai

Thermal expansion of the austenitic stainless steels and titanium alloys in the temperature range 5–300 K

✍ L.V. Skibina; V.Ya. Ilichev; M.M. Chernik; V.P. Popov 📂 Article 📅 1985 🏛 Elsevier Science 🌐 English ⚖ 166 KB

The effects of temperature and dose-rate

The effects of temperature and dose-rate variations on the creep of austenitic stainless steels in the dounreay fast reactor

✍ G.W. Lewthwaite; D. Mosedale 📂 Article 📅 1980 🏛 Elsevier Science 🌐 English ⚖ 890 KB

High temperature wear and friction behav

High temperature wear and friction behaviour of 15Cr–15Ni–2Mo titanium-modified austenitic stainless steel in liquid sodium

✍ Hemant Kumar; V. Ramakrishnan; S.K. Albert; C. Meikandamurthy; B.V.R. Tata; A.K. 📂 Article 📅 2010 🏛 Elsevier Science 🌐 English ⚖ 881 KB

The sliding friction and wear behaviour of 15Cr-15Ni-2Mo titanium-modified austenitic stainless steel (alloy D9) was studied in high purity liquid sodium at high temperature viz. 473 and 823 K respectively using a reciprocating-type tribometer. Weight loss measured in specimens after the tests was n

The influence of tempering temperature o

The influence of tempering temperature on the reversed austenite formation and tensile properties in Fe–13%Cr–4%Ni–Mo low carbon martensite stainless steels

✍ Yuanyuan Song; Xiuyan Li; Lijian Rong; Yiyi Li 📂 Article 📅 2011 🏛 Elsevier Science 🌐 English ⚖ 860 KB

The influence of tempering temperature on the reversed austenite formation and tensile properties are investigated in Fe-13%Cr-4%Ni-Mo low carbon martensite stainless steel in the temperature range of 550-950 • C. It is found that at the temperatures below 680 • C, the reversed austenite formation o

Kinetics of fatigue-induced phase transf

Kinetics of fatigue-induced phase transformation in a metastable austenitic 304L-type steel at low temperatures: Maier, H. J., Donth, B. and Schneeweiss, O. Scr. Metall. Mater. (Aug. 1993) 29 (4), 521–526

📂 Article 📅 1994 🏛 Elsevier Science 🌐 English ⚖ 142 KB