✦ LIBER ✦

Thermochemical destruction of a carbon epoxy composite under multiple pulse loading

✍ Scribed by A. M. Grishin; A. D. Parashin; A. S. Yakimov

Publisher: SP MAIK Nauka/Interperiodica
Year: 1993
Tongue: English
Weight: 676 KB
Volume: 29
Category: Article
ISSN: 0010-5082
DOI: 10.1007/bf00755336

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Moisture sorption of a three-dimensional

Moisture sorption of a three-dimensional braided carbon fiber–epoxy composite under different media

✍ Y. Z. Wan; K. Y. Han; Y. L. Wang; Y. Huang 📂 Article 📅 2005 🏛 John Wiley and Sons 🌐 English ⚖ 125 KB 👁 2 views

Damage and failure mechanisms of a3-dire

Damage and failure mechanisms of a3-directional carbon/carbon composite under uniaxial tensile and shear loads

✍ O. Siron; J. Lamon 📂 Article 📅 1998 🏛 Elsevier Science 🌐 English ⚖ 845 KB

AbstractÐThe mechanical behavior of a three-directional carbon/carbon (C/C) composite under tensile and shear loads is investigated in relation with the failure mechanisms and, the ®ber architecture. This three-directional C/C composite was produced by Chemical Vapor In®ltration of a needled ®ber pr

Topology optimization of structures unde

Topology optimization of structures under multiple load cases using a fiber-reinforced composite material model

✍ K. Zhou; X. Li 📂 Article 📅 2005 🏛 Springer 🌐 English ⚖ 277 KB

Fatigue delamination, initiation, and gr

Fatigue delamination, initiation, and growth, under mode I and II of fracture in a carbon-fiber epoxy composite

✍ Antonio Argüelles; Jaime Viña; Alfonso F. Canteli; Jorge Bonhomme 📂 Article 📅 2009 🏛 Society for Plastic Engineers 🌐 English ⚖ 406 KB

## Abstract In this article, interlaminar crack initiation and propagation under mode I and II dynamic loading of an epoxy matrix reinforced with unidirectional carbon fibers were evaluated. Delamination in mode I was carried out employing the DCB test (Double Cantilever Beam). In mode II, the ENF

Synthesis of carbon nanotube/epoxy compo

Synthesis of carbon nanotube/epoxy composite films with a high nanotube loading by a mixed-curing-agent assisted layer-by-layer method and their electrical conductivity

✍ Qing-Ping Feng; Jiao-Ping Yang; Shao-Yun Fu; Yiu-Wing Mai 📂 Article 📅 2010 🏛 Elsevier Science 🌐 English ⚖ 498 KB

The mixed-curing-agent consists of two types of agents, one of which is responsible for the partial initial curing at room temperature to avoid agglomeration of the CNTs, and the other for complete curing of epoxy resin at high temperature to synthesize epoxy composite films with good CNT dispersion