✦ LIBER ✦

Thermoanemometric measurements of the pulsations of the heat-transfer coefficient in a fluidized bed

✍ Scribed by N. F. Filippovskii; A. A. Zharkov; A. P. Baskakov

Publisher: Springer US
Year: 1980
Tongue: English
Weight: 423 KB
Volume: 38
Category: Article
ISSN: 1573-871X
DOI: 10.1007/bf00861181

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

The partial coefficient of heat transfer

The partial coefficient of heat transfer in a drying fluidized bed

✍ P.M. Heertjes; S.W. McKibbins 📂 Article 📅 1956 🏛 Elsevier Science 🌐 English ⚖ 500 KB

The determination of the partial coefficient of heat transfer from air to a drying fluidized mass of silicagel is given. The data obtained can be correlated by means of the equation h = 1.32 (R)"'re. A comparison of the external and internal heat exchange in a fluidized mass is presented.

Determination of the heat transfer coeff

Determination of the heat transfer coefficient in fluidized-bed installations

✍ L. F. Liberman; K. G. Mosentsov 📂 Article 📅 1992 🏛 Springer US 🌐 English ⚖ 245 KB

Change in heat-transfer coefficient in t

Change in heat-transfer coefficient in the drying of heat-insulated materials in a fluidized bed

✍ A. P. Baskakov 📂 Article 📅 1976 🏛 Springer US 🌐 English ⚖ 371 KB

Determining the convective component of

Determining the convective component of the heat-transfer coefficient to a gas in a fluidized bed

✍ A. P. Baskakov; V. M. Suprun 📂 Article 📅 1971 🏛 Springer 🌐 English ⚖ 198 KB

A method of determining the interphase h

A method of determining the interphase heat-transfer coefficient in a fluidized bed of granular materials

✍ N. I. Gel'perin; V. G. Ainshtein 📂 Article 📅 1967 🏛 Springer US 🌐 English ⚖ 106 KB

Method of calculation of heat transfer c

Method of calculation of heat transfer coefficient of the heater in a circulating fluidized bed furnace

✍ J.F. Lu; J.S. Zhang; G.X. Yue; Q. Liu; L. Yu; X.D. Lin; W.J. Li; Y. Tang; T.Y. L 📂 Article 📅 2002 🏛 John Wiley and Sons 🌐 English ⚖ 365 KB

## Abstract Knowledge of heat transfer coefficients is important in the design and operation of CFB boilers. It is the key to determining the area and the layout of the heat transfer surfaces in a CFB furnace. Local bulk density has a close relationship to the local heat transfer coefficient. Using