Thermal insulation property of cu-metallized nanofibers
✍ Scribed by Soonjee Park; Yujin Lee; Byoung-Suhk Kim; Ick-Soo Kim
- Publisher
- John Wiley and Sons
- Year
- 2011
- Tongue
- English
- Weight
- 283 KB
- Volume
- 31
- Category
- Article
- ISSN
- 0730-6679
No coin nor oath required. For personal study only.
✦ Synopsis
Abstract
This study investigated the thermal insulation properties of laminated nanofiber web metallized with copper to explore its potential application for use in wear via mass production process. Copper metallization formed a more compact morphology with fine pores, resulting in piling up the air within the ultrathin nanoporous layers. The mechanism of thermal insulation of laminated nanofiber web metallized with copper could be illustrated as following: As deposited on the nanofiber webs, copper reflects the heat from the body back and the air stacked within the nanofiber layers, preventing the emission of heat flux out of the fabric. It was clearly found that metallization could maintain the inside temperature more highly than nonmetallized material by ca. 1.0–1.5°C. The results obtained from this study suggested the wide applications of metallization to protective and energy‐saving products such as garments, filters, and interior materials. © 2011 Wiley Periodicals, Inc. Adv Polym Techn 31: 1–6, 2012; View this article online at wileyonlinelibrary.com. DOI 10.1002/adv.20229
📜 SIMILAR VOLUMES
## The thermal contraction and thermal conductivity of candidate composite insulation systems for the International Thermonuclear Experimental Reactor toroidal field coils were measured from 295 to 4 K. Matrix materials consisted of a diglycidyl ether of bisphenol-A epoxy suitable for vacuum impre
## Abstract We report that the metal‐deposited single nanofibers can be successfully prepared by electrospinning and metallization. The tensile strength of the metal‐deposited single nanofibers as well as various non‐metallized polymeric nanofibers was investigated by recently developed tensile tes
## Abstract This work aims at improving the interfacial bonding between polyamide‐12 and CNFs. CNFs were oxidized and dispersed in polyamide‐12 giving rise to polymer nanocomposites. The oxidation caused an increase in the specific surface area and structural defects of the fibers, as indicated by