𝔖 Bobbio Scriptorium
✦   LIBER   ✦

Thermal effect of plastic dissipation at the crack tip on the stress intensity factor under cyclic loading

✍ Scribed by N. Ranc; T. Palin-Luc; P.C. Paris

Publisher
Elsevier Science
Year
2011
Tongue
English
Weight
483 KB
Volume
78
Category
Article
ISSN
0013-7944

No coin nor oath required. For personal study only.

✦ Synopsis

Plastic dissipation at the crack tip under cyclic loading is responsible for the creation of an heterogeneous temperature field around the crack tip. A thermomechanical model is proposed in this paper for the theoretical problem of an infinite plate with a semi-infinite through crack under mode I cyclic loading both in plane stress or in plane strain condition. It is assumed that the heat source is located in the reverse cyclic plastic zone. The proposed analytical solution of the thermo-mechanical problem shows that the crack tip is under compression due to thermal stresses coming from the heterogeneous stress field around the crack tip. The effect of this stress field on the stress intensity factor (its maximum and its range) is calculated analytically for the infinite plate and by finite element analysis. The heat flux within the reverse cyclic plastic zone is the key parameter to quantify the effect of dissipation at the crack tip on the stress intensity factor.

πŸ“œ SIMILAR VOLUMES

Stress Intensity Factors of a circumfere
Stress Intensity Factors of a circumferential surface crack at the outside of a thermally loaded pipe
✍ Dr. H. Grebner πŸ“‚ Article πŸ“… 1992 πŸ› John Wiley and Sons 🌐 English βš– 330 KB πŸ‘ 1 views

## Abstract Stress intensity factors were calculated for partly circumferential surface cracks at the outside of a pipe. The pipe is loaded by internal pressure and by thermal stresses. The weight functions method is used to calculate averaged weighted stress intensity factors at the deepest point

Effect of stress-induced martensitic tra
Effect of stress-induced martensitic transformation on the crack tip stress-intensity factor in Ni–Mn–Ga shape memory alloy
✍ Feng Xiong; Yong Liu πŸ“‚ Article πŸ“… 2007 πŸ› Elsevier Science 🌐 English βš– 565 KB

The Ni-Mn-Ga shape memory ferromagnetic shape memory alloys (FSMAs) are prone to fracture during thermal cycling. The present research shows that the primary reason for the thermally induced fracture of Ni-Mn-Ga FSMAs is the increase in the crack tip stress-intensity factor (SIF) due to stress redis

Effects of temperature, initial stress i
Effects of temperature, initial stress intensity factor and loading speed on the crack branching in delayed failure
✍ Nakasa Keijiro; Takei Hideo; Yoshida Motoharu πŸ“‚ Article πŸ“… 1980 πŸ› Elsevier Science 🌐 English βš– 951 KB

The relation between diffusion behavior of hydrogen atoms and crack branching in delayed failure was discussed. The hypotheses that diffusion paths of hydrogen atoms at crack tip broaden with increase of stress intensity factor K, and that crack branching occurs when hydrogen atoms diffuse through