✦ LIBER ✦

Thermal degradation and biodegradability of poly (lactic acid)/corn starch biocomposites

✍ Scribed by Tsutomu Ohkita; Seung-Hwan Lee

Publisher: John Wiley and Sons
Year: 2006
Tongue: English
Weight: 370 KB
Volume: 100
Category: Article
ISSN: 0021-8995
DOI: 10.1002/app.23425

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Mechanical and thermal properties of sta

Mechanical and thermal properties of starch-filled poly(D,L-lactic acid)/poly(hydroxy ester ether) biodegradable blends

✍ Donald Garlotta; William Doane; Randal Shogren; John Lawton; J. L. Willett 📂 Article 📅 2003 🏛 John Wiley and Sons 🌐 English ⚖ 354 KB 👁 2 views

Biodegradable foams of poly(lactic acid)

Biodegradable foams of poly(lactic acid)/starch. II. Cellular structure and water resistance

✍ Jian-Feng Zhang; Xiuzhi Sun 📂 Article 📅 2007 🏛 John Wiley and Sons 🌐 English ⚖ 221 KB 👁 2 views

Thermal oxidative degradation kinetics a

Thermal oxidative degradation kinetics and thermal properties of poly(ethylene terephthalate) modified with poly(lactic acid)

✍ Işıl Acar; Gülin Selda Pozan; Saadet Özgümüş 📂 Article 📅 2008 🏛 John Wiley and Sons 🌐 English ⚖ 138 KB 👁 1 views

Melt spinning of poly(L-lactic acid) and

Melt spinning of poly(L-lactic acid) and its biodegradability

✍ Yoshiro Nishimura; Akinori Takasu; Yoshihito Inai; Tadamichi Hirabayashi 📂 Article 📅 2005 🏛 John Wiley and Sons 🌐 English ⚖ 174 KB 👁 2 views

Biodegradation study of a coextruded sta

Biodegradation study of a coextruded starch and poly(lactic acid) material in various media

✍ Richard Gattin; Alain Copinet; Céline Bertrand; Yves Couturier 📂 Article 📅 2003 🏛 John Wiley and Sons 🌐 English ⚖ 197 KB 👁 1 views

Biodegradable foams of poly(lactic acid)

Biodegradable foams of poly(lactic acid)/starch. I. Extrusion condition and cellular size distribution

✍ Jian-Feng Zhang; Xiuzhi Sun 📂 Article 📅 2007 🏛 John Wiley and Sons 🌐 English ⚖ 171 KB 👁 1 views

## Abstract Biodegradable foams derived from poly(lactic acid) (PLA) and starch were prepared by extrution using water as a blowing agent and talc as nucleation agent. Foam cellular size and size distribution was significantly affected by extrusion conditions (i.e., extruder temperature profiles, d