✦ LIBER ✦

Thermal conductivity of catalyst pellets and other porous particles: Part II: Experimental measurements

✍ Scribed by C.S. Sharma; Peter Harriott; Ronald Hughes

Book ID: 107939481
Publisher: Elsevier Science
Year: 1975
Weight: 618 KB
Volume: 10
Category: Article
ISSN: 0300-9467
DOI: 10.1016/0300-9467(75)88019-1

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Thermal conductivity of catalyst pellets

Thermal conductivity of catalyst pellets and other porous particles: Part I: Review of models and published results

✍ Peter Harriott 📂 Article 📅 1975 🏛 Elsevier Science ⚖ 617 KB

The thermal conductivity of porous catal

The thermal conductivity of porous catalyst pellets

✍ M. Soomro; R. Hughes 📂 Article 📅 1979 🏛 John Wiley and Sons 🌐 English ⚖ 572 KB

Experimental Measurements of the Thermal

Experimental Measurements of the Thermal Conductivity of Ash Deposits: Part 2. Effects of Sintering and Deposit Microstructure

✍ Robinson, Allen L.; Buckley, Steven G.; Yang, Nancy; Baxter, Larry L. 📂 Article 📅 2001 🏛 American Chemical Society 🌐 English ⚖ 401 KB

Effective thermal conductivity and therm

Effective thermal conductivity and thermal diffusivity of catalysts and their supports as functions of temperature in various gaseous media and in vacuum. II. Thermal conductivity and thermal diffusivity of granulated porous catalysts as functions of internal and external factors

✍ Kh. Madzhidov 📂 Article 📅 1996 🏛 Springer US 🌐 English ⚖ 932 KB

Thermal conductivity of YBCO and thermal

Thermal conductivity of YBCO and thermal conductance at YBCO/ruby boundary Part 1: Joint experimental set-up for simultaneous measurements and experimental study in the temperature range 10–260 K

✍ B.M. Terzijska; R. Wawryk; D.A. Dimitrov; Cz. Marucha; V.T. Kovachev; J. Rafalow 📂 Article 📅 1992 🏛 Elsevier Science 🌐 English ⚖ 676 KB

A joint experimental set-up has been constructed for simultaneous low temperature measurements of thermal conductivity, k, of two solid samples and thermal conductance, R~I, at a solid/solid boundary using the steady state method. The thermal measurements presented here were carried out in the tempe

Modeling and Measurement of the Dissolut

Modeling and Measurement of the Dissolution Rate of Solid Particles in Aqueous Suspensions – Part II: Experimental Results and Validation

✍ T. Allers; M. Luckas; K.G. Schmidt 📂 Article 📅 2003 🏛 John Wiley and Sons 🌐 English ⚖ 975 KB