Thermal Conductivity and Contact Resistance of Compressed Gas Diffusion Layer of PEM Fuel Cell
✍ Scribed by I. Nitta; O. Himanen; M. Mikkola
- Publisher
- John Wiley and Sons
- Year
- 2008
- Tongue
- English
- Weight
- 238 KB
- Volume
- 8
- Category
- Article
- ISSN
- 1615-6846
No coin nor oath required. For personal study only.
✦ Synopsis
Abstract
This paper discusses the effect of compression pressure on the mechanical and thermal properties of gas diffusion layers (GDL). The stress–strain curve of the GDL revealed one nonlinear and two piecewise linear regions within the compression pressure range of 0–5.5 MPa. The thermal conductivity of the compressed GDL seems to be independent of the compression pressure and was determined to be 1.18 ± 0.11 W m^–1^ K^–1^ at room temperature. The thermal contact resistance between the GDL and graphite was evaluated by augmenting experiments with computer modelling. The thermal contact resistance decreased nonlinearly with increasing compression pressure. According to the results here, the thermal bulk resistance of the GDL is comparable to the thermal contact resistance between the GDL and graphite. A simple one‐dimensional model predicted a temperature drop of 1.7–4.4 °C across the GDL and catalyst layer depending on compression pressures.
📜 SIMILAR VOLUMES
## Abstract This study investigates the gas permeability, conductivity and performance of two types of gas diffusion layer (90 g m^–2^ and 190 g m^–2^) with various hydrophobic treatments. The performance is measured using a single proton exchange membrane fuel cell (PEMFC) with an active area of 2
## Abstract A gas diffusion layer (GDL) with carbon prepared from paraffin wax was developed for the first time to impart hydrophobicity and porosity for fuel cell application. It is also intended to reduce the non‐functional binder content in the microporous layer and to achieve optimum performanc
## Abstract This work deals with a new route to modify polymer blend morphology in order to improve the porosity of gas diffusion layers (GDLs) for proton exchange membrane fuel cells (PEMFCs). First, electrically conductive polymer‐based blends were carefully formulated using a twin‐screw extrusio