𝔖 Bobbio Scriptorium
✦   LIBER   ✦

Thermal bonding of polypropylene films and fibers

✍ Scribed by Raghavendra R. Hegde; Gajanan S. Bhat; R. A. Campbell

Publisher
John Wiley and Sons
Year
2008
Tongue
English
Weight
613 KB
Volume
110
Category
Article
ISSN
0021-8995

No coin nor oath required. For personal study only.

πŸ“œ SIMILAR VOLUMES

Production of thermally stable polypropy
Production of thermally stable polypropylene fibers
✍ Y. Qin; D. L. Brydon; R. R. Mather πŸ“‚ Article πŸ“… 1996 πŸ› John Wiley and Sons 🌐 English βš– 485 KB

TD1 3HF, Scotland SYNOPSIS Polypropylene (PP) fibers were made with a number of different processing conditions, such as one-stage drawing, two-stage drawing, and a combination of drawing, annealing, and relaxation. The thermal stability of these fibers in terms of shrinkage in length at 100, 130, a

Electrical and thermal properties of pol
Electrical and thermal properties of polypropylene filled with steel fibers
✍ T. Katsura; M. R. Kamal; L. A. Utracki πŸ“‚ Article πŸ“… 1985 πŸ› John Wiley and Sons 🌐 English βš– 978 KB

Polypropylene (PP) compositions containing 0-20 vol % of steel fibers (SF) [neat or with 5 wt % of muleated propylene wax (MPP)] were prepared and tested for electrical and thermal conductivities. It was found that, at room temperature, the volume resistivity a, fell below 10 ohm cm at SF loading of

Thermal degradation of epoxy resin reinf
Thermal degradation of epoxy resin reinforced with polypropylene fibers
✍ T. Niranjana Prabhu; Y. J. Hemalatha; V. Harish; K. Prashantha; P. Iyengar πŸ“‚ Article πŸ“… 2007 πŸ› John Wiley and Sons 🌐 English βš– 262 KB πŸ‘ 2 views

## Abstract The influence of polypropylene fibers on the thermal degradation of epoxy composites was investigated with thermogravimetric analysis. Three composites with 5, 10, or 15 wt % polypropylene fibers were prepared with epoxy as a matrix material. The polypropylene fibers, used as reinforcin