✦ LIBER ✦

Thermal behaviors of Ni-MH batteries using a novel impedance spectroscopy

✍ Scribed by Pu Xiao; Wenying Gao; Xinping Qiu; Wentao Zhu; Jie Sun; Liquan Chen

Publisher: Elsevier Science
Year: 2008
Tongue: English
Weight: 750 KB
Volume: 182
Category: Article
ISSN: 0378-7753
DOI: 10.1016/j.jpowsour.2008.03.055

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Thermal behavior simulation of Ni/MH bat

Thermal behavior simulation of Ni/MH battery

✍ Li, DaHe ;Yang, Kai ;Chen, Shi ;Wu, Feng 📂 Article 📅 2009 🏛 Elsevier 🌐 English ⚖ 754 KB

Evaluation of TGO growth in thermal barr

Evaluation of TGO growth in thermal barrier coatings using impedance spectroscopy

✍ Hui Huang; Chao Liu; Liyong Ni; Chungen Zhou 📂 Article 📅 2011 🏛 Nonferrous Metals Society of China 🌐 English ⚖ 539 KB

A novel method for the characterisation

A novel method for the characterisation of the double fixed charge (bipolar) membrane using impedance spectroscopy

✍ T.C. Chilcott; H.G.L. Coster; E.P. George 📂 Article 📅 1995 🏛 Elsevier Science 🌐 English ⚖ 900 KB

ChemInform Abstract: Effect of Cu Powder

ChemInform Abstract: Effect of Cu Powder as an Additive Material on the Inner Pressure of a Sealed-Type Ni—MH Rechargeable Battery Using a Zr-Based Alloy as an Anode.

✍ Dong-Myung Kim; Ho Lee; Kurn Cho; Jai-Young Lee 📂 Article 📅 2010 🏛 John Wiley and Sons ⚖ 34 KB 👁 2 views

Thermal behavior of a weatherproof power

Thermal behavior of a weatherproof power supply system with built-in nickel-metal hydride batteries developed for stationary use

✍ Akihiro Miyasaka; Riichi Kitano; Akira Yamashita; Takahisa Shodai 📂 Article 📅 2009 🏛 Elsevier Science 🌐 English ⚖ 817 KB

Stress rupture behavior of a thermal bar

Stress rupture behavior of a thermal barrier coated AE 437A Ni-based superalloy used for aero turbine blades

✍ A.K. Ray; J.D. Whittenberger 📂 Article 📅 2009 🏛 Elsevier Science 🌐 English ⚖ 409 KB

The stress rupture characteristics of bare and thermal barrier coated (TBC) superalloy AE 437A were determined in air at temperatures between 600 and 850 • C with both short and long term testing undertaken at 800 • C. Because the bond coat contributed an addition ∼10% cross-sectional area and was a