✦ LIBER ✦

Thermal and mechanical properties of polystyrene/poly(acrylonitrile-g-(ethylene-co-propylene-co-diene)-g-styrene) (AES) blends prepared by the in situ polymerization of styrene

✍ Scribed by Emerson Lourenço; Maria Isabel Felisberti

Publisher: John Wiley and Sons
Year: 2007
Tongue: English
Weight: 914 KB
Volume: 105
Category: Article
ISSN: 0021-8995
DOI: 10.1002/app.26330

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Dynamic mechanical and morphological beh

Dynamic mechanical and morphological behavior of blends of polystyrene and poly[acrylonitrile-g-(ethylene-co-propylene-co-diene)-g-styrene] prepared by in situ polymerization of styrene

✍ Emerson Lourenço; Maria do Carmo Gonçalves; Maria Isabel Felisberti 📂 Article 📅 2009 🏛 John Wiley and Sons 🌐 English ⚖ 360 KB 👁 2 views

Effects of the polybutadiene/poly(styren

Effects of the polybutadiene/poly(styrene-co-acrylonitrile) ratio in a polybutadiene-g-poly(styrene-co-acrylonitrile) impact modifier on the morphology and mechanical behavior of acrylonitrile–butadiene–styrene blends

✍ X. F. Xu; H. D. Yang; H. X. Zhang 📂 Article 📅 2005 🏛 John Wiley and Sons 🌐 English ⚖ 173 KB 👁 2 views

A polymer of bisphenol A and bisphenol A

A polymer of bisphenol A and bisphenol A diglycidyl ether and its blends with poly(styrene-co-acrylonitrile): In situ polymerization preparation, morphology, and mechanical properties

✍ Sixun Zheng; Jinyu Huang; Zhikai Zhong; Gufeng He; Qipeng Guo 📂 Article 📅 1999 🏛 John Wiley and Sons 🌐 English ⚖ 220 KB 👁 2 views

The poly(hydroxy ether of bisphenol A)-based blends containing poly(acrylontrile-co-styrene) (SAN) were prepared through in situ polymerization, i.e., the melt polymerization between the diglycidy ether of bisphenol A (DGEBA) and bisphenol A in the presence of poly(acrylontrile-co-styrene) (SAN). Th

Studies on impact modification of polyst

Studies on impact modification of polystyrene (PS) by ethylene–propylene–diene (EPDM) rubber and its graft copolymers. II. PS/EPDM-g-(styrene-co-methylmethacrylate) blends

✍ S. Shaw; R. P. Singh 📂 Article 📅 1990 🏛 John Wiley and Sons 🌐 English ⚖ 523 KB

Studies on impact modification of polyst

Studies on impact modification of polystyrene (PS) by ethylene–propylene–diene (EPDM) rubber and its graft copolymers. III. PS/EPDM-g-(styrene-co-maleic anhydride) blends and its relative performance

✍ S. Shaw; R. P. Singh 📂 Article 📅 1990 🏛 John Wiley and Sons 🌐 English ⚖ 470 KB 👁 2 views

Mill processability of brominated isobut

Mill processability of brominated isobutylene-co-paramethyl styrene and its blends with ethylene propylene diene terpolymer (EPDM) in the continuous milling operation

✍ Bhuwneesh Kumar; P. P. De; S. K. De; A. K. Bhowmick; D. G. Peiffer 📂 Article 📅 2002 🏛 John Wiley and Sons 🌐 English ⚖ 1018 KB

## Abstract The milling behavior of brominated isobutylene‐co‐paramethylstyrene (BIMS), ethylene propylene diene terpolymer (EPDM), and their blends was investigated over a range of temperatures and friction ratios using the continuous milling operation. At 30 °C, BIMS forms a loose nervy appearanc