𝔖 Bobbio Scriptorium
✦   LIBER   ✦

Theoretical and experimental study of microstructures and weld pool geometry during GTAW of 304 stainless steel

✍ Scribed by H. Jamshidi Aval; A. Farzadi; S. Serajzadeh; A. H. Kokabi

Publisher
Springer
Year
2008
Tongue
English
Weight
613 KB
Volume
42
Category
Article
ISSN
0268-3768

No coin nor oath required. For personal study only.

πŸ“œ SIMILAR VOLUMES

Study on microstructure and mechanical p
Study on microstructure and mechanical properties of 304 stainless steel joints by TIG, laser and laser-TIG hybrid welding
✍ Jun Yan; Ming Gao; Xiaoyan Zeng πŸ“‚ Article πŸ“… 2010 πŸ› Elsevier Science 🌐 English βš– 825 KB

This paper investigated the microstructure and mechanical properties of 304 stainless steel joints by tungsten inert gas (TIG) welding, laser welding and laser-TIG hybrid welding. The X-ray diffraction was used to analyze the phase composition, while the microscopy was conducted to study the microst

Effect of laser welding parameters on fu
Effect of laser welding parameters on fusion zone morphological, mechanical and microstructural characteristics of AISI 304 stainless steel
✍ S. Γ‡elen; S. Karadeniz; H. Γ–zden πŸ“‚ Article πŸ“… 2008 πŸ› John Wiley and Sons 🌐 English βš– 447 KB

## Abstract Nowadays, the Nd:YAG laser has been a promising key tool for joining thin components. In this research, mechanical and microstructural properties of laser welded thin austenitic stainless steel sheets were investigated with experimental investigations, as a function of laser welding par

A study on the relationship between weld
A study on the relationship between welding conditions and residual stress of resistance spot welded 304-type stainless steels
✍ B-W. Cha; S-J. Na πŸ“‚ Article πŸ“… 2003 πŸ› Society of Manufacturing Engineers 🌐 English βš– 809 KB

Tensile residual stress of resistance spot welded structures increases the maximum stress and tends to reduce fatigue strength. Accordingly, the welding process must be optimized to minimize the tensile residual stress. This paper presents residual stress obtained from electrical-thermalstructural a

A study on the relationship between weld
A study on the relationship between welding conditions and residual stress of resistance spot welded 304-type stainless steels
πŸ“‚ Article πŸ“… 2004 πŸ› Society of Manufacturing Engineers 🌐 English βš– 234 KB

## 2003-2004 abstract and ke cword index specifically identify M. parafortuitum among a mixed microbial community in MWE It is also shown that the M. parafortuitum labeling methods are insensitive to the synthetic, semi-synthetic, and soluble oil MWF chemistries investigated. In addition, the use