𝔖 Bobbio Scriptorium
✦   LIBER   ✦

Theoretical and Experimental Investigation of the Production of PMMA-Based Bone Cement

✍ Scribed by Santos, Jorge G. F.; Peixoto, Luciana S.; Nele, Márcio; Melo, Príamo A.; Pinto, José Carlos

Book ID
121230281
Publisher
John Wiley and Sons
Year
2006
Tongue
English
Weight
189 KB
Volume
243
Category
Article
ISSN
1022-1360

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Flexural strength distribution of a PMMA
Flexural strength distribution of a PMMA-based bone cement
✍ Vallo, Claudia I. 📂 Article 📅 2002 🏛 John Wiley and Sons 🌐 English ⚖ 201 KB

## Abstract Polymethylmethacrylate bone cement containing either no added antibiotic or 0.5 g of Gentamicin was prepared and stored either in air at room temperature or in a 37 °C water bath for 48 h. An additive‐free cement stored in air at room temperature was also tested for purposes of comparis

Theoretical prediction and experimental
Theoretical prediction and experimental determination of the effect of mold characteristics on temperature and monomer conversion fraction profiles during polymerization of a PMMA-based bone cement
✍ Vallo, Claudia I. 📂 Article 📅 2002 🏛 John Wiley and Sons 🌐 English ⚖ 429 KB 👁 1 views

The present work is concerned with applications of a kinetic model for free-radical polymerization of a polymethylmethacrylate-based bone cement. Autocatalytic behavior at the first part of the reaction as well as a diffusion control phenomenon near vitrification are described by the model. Comparis

PMMA-based bone cements containing magne
PMMA-based bone cements containing magnetite particles for the hyperthermia of cancer
✍ M. Kawashita; K. Kawamura; Z. Li 📂 Article 📅 2010 🏛 Elsevier Science 🌐 English ⚖ 730 KB

Polymethylmethacrylate-based cements containing magnetite (Fe 3 O 4 ) particles were prepared and their structure and properties were investigated. The Fe 3 O 4 particles were uniformly dispersed in the cement matrix and constituted a maximum of 60 wt.% of the total weight of cement. The setting tim