✦ LIBER ✦

The use of ultrasonic signals and optical method to estimate the damage of materials after fatigue loading

✍ Scribed by Mishakin, V.V.; Mitenkov, F.M.; Klyushnikov, V.A.; Danilova, N.V

Book ID: 121505755
Publisher: Taylor and Francis Group
Year: 2010
Tongue: English
Weight: 187 KB
Volume: 25
Category: Article
ISSN: 1058-9759
DOI: 10.1080/10589750903490454

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Strength of the materials used for pisto

Strength of the materials used for pistons of internal-combustion engines on subjection to fatigue and thermal fatigue loading

✍ V. T. Troshchenko; S. P. Sinyavskii; S. S. Gorodetskii; A. P. Gopkalo; A. K. Rus 📂 Article 📅 1976 🏛 Springer 🌐 English ⚖ 508 KB

Asphalt material fatigue test under cycl

Asphalt material fatigue test under cyclic loading: the lengthening of samples as a way to characterize the material damage experiments and modelling

✍ Y. Lefeuvre; C. de La Roche; J. -M. Piau 📂 Article 📅 2005 🏛 Springer 🌐 English ⚖ 531 KB

Effective method to minimize the residua

Effective method to minimize the residual ethylene oxide level after sterilization of plastic materials using ultrasonic vibration

✍ Ikeda, C. 📂 Article 📅 1979 🏛 John Wiley and Sons 🌐 English ⚖ 129 KB

A novel engineering method based on the

A novel engineering method based on the critical plane concept to estimate the lifetime of weldments subjected to variable amplitude multiaxial fatigue loading

✍ L. SUSMEL; R. TOVO; D. BENASCIUTTI 📂 Article 📅 2009 🏛 John Wiley and Sons 🌐 English ⚖ 346 KB

On the use of the Theory of Critical Dis

On the use of the Theory of Critical Distances and the Modified Wöhler Curve Method to estimate fretting fatigue strength of cylindrical contacts

✍ J.A. Araújo; L. Susmel; D. Taylor; J.C.T. Ferro; E.N. Mamiya 📂 Article 📅 2007 🏛 Elsevier Science 🌐 English ⚖ 433 KB

This paper summarises an attempt to propose a methodology suitable for estimating high-cycle fatigue strength of cylindrical contacts under a partial slip regime. In particular, Taylor's point method, usually applied to predict fatigue limits of notched components, was used in conjunction with the M

Resistance of metals to fatigue failure

Resistance of metals to fatigue failure and deformation during two-frequency loading Report 2. Method for estimating the cyclic endurance during two-frequency loading

✍ L. A. Khamaza; V. A. Kovalenko 📂 Article 📅 1989 🏛 Springer 🌐 English ⚖ 415 KB