𝔖 Bobbio Scriptorium
✦   LIBER   ✦

The use of the flow cone test in the prediction of the physical properties of cement mortars

✍ Scribed by N.McN. Alford; A.B. Poole

Publisher
Elsevier Science
Year
1980
Tongue
English
Weight
755 KB
Volume
10
Category
Article
ISSN
0008-8846

No coin nor oath required. For personal study only.

πŸ“œ SIMILAR VOLUMES

Effect of the β€œPozzolit” active mineral
Effect of the β€œPozzolit” active mineral admixture on the properties of cement mortars and concretes part 1: Physical and mechanical properties
✍ Vanyo Stoitchkov; Petar Abadjiev; Vili Lilkov; Victoria Vasileva πŸ“‚ Article πŸ“… 1996 πŸ› Elsevier Science 🌐 English βš– 497 KB

The results from investigations on the physical and mechanical properties of cement mortars and concretes containing the active mineral Pozzolit admixture are presented in this paper. The basic components of this admixture are silica fume (SF) and low calcium content fly ash (FA). The compressive an

The flow properties of dental cements
The flow properties of dental cements
✍ Wilson, Alan D. ;Lewis, Brian G. πŸ“‚ Article πŸ“… 1980 πŸ› John Wiley and Sons 🌐 English βš– 376 KB

## Abstract The flow properties of several major types of dental cements were investigated using slow compressive strength and creep techniques. Considerable differences were found in their behavior. Whereas the phosphate‐bonded and glass‐ionomer cements exhibited brittle fracture, the other cement

Effect of polyacrylamide on the differen
Effect of polyacrylamide on the different properties of cement and mortar
✍ U.S. Rai; R.K. Singh πŸ“‚ Article πŸ“… 2005 πŸ› Elsevier Science 🌐 English βš– 242 KB

The effect of polyacrylamide (PAA) addition in the ordinary cement and mortar, on the properties, such as setting time, heat of hydration, compressive and tensile strength has been studied by adding 0.5-5.0% additive by weight of cement. While hardness was determined using the Vickers indentation me

Empirical prediction of smoke production
Empirical prediction of smoke production in the ISO Room Corner Fire Test by use of ISO Cone Calorimeter Fire Test data
✍ Atle William Heskestad; Per Jostein Hovde πŸ“‚ Article πŸ“… 1999 πŸ› John Wiley and Sons 🌐 English βš– 116 KB πŸ‘ 2 views

The combustion conditions in the ISO Room Corner Fire Test make it possible to predict full scale smoke production by use of prediction models and bench scale 5re test data procured by the ISO Cone Calorimeter Fire Test. The full scale smoke production is governed by the type of material burning onl