## Abstract A fly ash sample was used as sorbent for trace element (As, Se, Cd and Zn) species at high temperatures in flue gases from coal gasification. The influence of temperature (550 and 750 °C) and gas composition (with and without H~2~S and HCl) on retention capacity was evaluated. It was co
The use of coal fly ash in sodic soil reclamation
✍ Scribed by D. Kumar; B. Singh
- Publisher
- John Wiley and Sons
- Year
- 2003
- Tongue
- English
- Weight
- 145 KB
- Volume
- 14
- Category
- Article
- ISSN
- 1085-3278
- DOI
- 10.1002/ldr.557
No coin nor oath required. For personal study only.
✦ Synopsis
Abstract
An experiment was conducted for two years in northwest India to explore the feasibility of using coal fly ash for reclamation of waterlogged sodic soils and its resultant effects on plant growth in padi–wheat rotation. The initial pH, electrical conductivity, exchangeable sodium percentage and sodium adsorption ratio of the experimental soil were 9.07, 3.87 dS m^−1^, 26.0 and 4.77 (me l)^−1/2^, respectively. The fly ash obtained from electrostatic precipitators of thermal power plant had a pH of 5.89 and electrical conductivity of 0.88 dS m^−1^. The treatments comprised of fly ash levels of 0.0, 1.5, 3.0, 4.5, 6.0 and 7.5 per cent, used alone as well as in combination with 100, 80, 60, 40, 20 and 10 per cent gypsum requirement of the soil, respectively. There was a slight reduction in soil pH while electrical conductivity of the soil decreased significantly with fly ash as measured after padi and wheat crops. The sodium adsorption ratio of the soil decreased with increasing fly ash levels, while gypsum treatments considerably added to its favourable effects. Fly ash application increased the available elemental status of N, K, Ca, Mg, S, Fe, Mn, B, Mo, Al, Pb, Ni, Co, but decreased Na, P and Zn in the soil. An application of fly ash to the soil also increased the concentrations of above elements except Na, P and Zn in the seeds and straw of padi and wheat crops. The available as well as elemental concentrations in the plants was maximum in the 0 per cent fly ash + 100 per cent gypsum requirement treatment except Na and heavy elements like Ni, Co, Cr. The treatment effects were greater in the fly ash + gypsum requirement combinations as compared to fly ash alone. Saturated hydraulic conductivity and soil water retention generally improved with the addition of fly ash while bulk density decreased. Application of fly ash up to 4.5 per cent level increased the straw and grain yield of padi and wheat crops significantly in both years. The results indicated that for reclaiming sodic soils of the southwest Punjab, gypsum could possibly be substituted up to 40 per cent of the gypsum requirement with 3.0 per cent acidic fly ash. Copyright © 2003 John Wiley & Sons, Ltd.
📜 SIMILAR VOLUMES
## Abstract The amorphous phase of fly ash dominates degradation behaviour because glass has a higher potential energy than the equivalent crystal structure and the variation of bond angles and distances in a glass make the bond breakage easier. It would be advantageous to predict the presence and
The potential of Ñy ash procured form coal-Ðred thermal power plants was studied as a heterogeneous catalyst in the oxidation of aqueous sodium sulÐde solutions with hydrogen peroxide in the temperature range of 303È323 K. The e †ects of various parameters (source of Ñy ash, Ñy ash loading, initial
## Abstract The enhancement in the workability of Portland cement concrete when coal fly ashes are added to the mix is well‐known. This behaviour has been attributed to the spherical shape and the smooth surface of the fly ash particles. On the other hand, when other combustion residues with pozzol